MAX4996ETG+T

$9.02

Description：IC SWITCH DPDT X 3 4OHM 24TQFN
Series：-

SKU:3db588a8b552 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4996ETG+T is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH DPDT X 3 4OHM 24TQFN. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4996ETG+T

Description：IC SWITCH DPDT X 3 4OHM 24TQFN
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tape & Reel (TR),Cut Tape (CT)
Switch Circuit：DPDT
Multiplexer/Demultiplexer Circuit：2:02
On-State Resistance (Max)：4Ohm
Channel-to-Channel Matching (ΔRon)：100mOhm
Voltage - Supply, Single (V+)：2.5V ~ 5.5V
Voltage - Supply, Dual (V±)：-
Switch Time (Ton, Toff) (Max)：100µs, 6µs
-3db Bandwidth：670MHz
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：2.5pF, 4pF
Current - Leakage (IS(off)) (Max)：250nA
Crosstalk：-
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：24-WFQFN Exposed Pad
Supplier Device Package：24-TQFN (4x4)
Number of Circuits：3

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4996ETG+T

MAX4996ETG+T

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4996ETG+T is a triple double-pole double-throw (DPDT) analog switch manufactured by Analog Devices Inc./Maxim Integrated. It operates from a single +2.5V to +5.5V supply and features a typical on-resistance of 2.0Ω and low on-capacitance of 6pF. The device includes three logic inputs to control switches in pairs, with an active-high enable input for the MAX4996 variant. It offers a -3dB bandwidth of 670MHz and operates over a temperature range of -40°C to +85°C. The component is housed in a space-saving 24-pin TQFN package with dimensions of 3.5mm x 3.5mm.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Triple DPDT configuration with low on-resistance and low capacitance for high-frequency switching
Active-high enable input reduces supply current and places outputs in a high-impedance state
Rail-to-rail signal handling capability with excellent on-resistance flatness
Wide -3dB bandwidth suitable for portable electronics applications

Analog Switches, Multiplexers, Demultiplexers Applications

SD Card Switching
USB Signal Switching
UART Signal Switching
Cell Phones
Portable Media Players

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix against official documentation to ensure correct pinout and enable logic polarity. Confirm that the package type matches the required footprint for PCB layout. Check RoHS compliance status as indicated in the manufacturer's datasheet. Ensure the operating temperature range aligns with the intended application environment. Validate the supply voltage requirements before integration into the circuit design.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX4996 variant if an active-high enable signal is preferred for controlling the switch states. Consider the MAX4996L if an active-low enable input better suits the system logic levels. Evaluate the 2.0Ω typical on-resistance and 6pF capacitance to ensure they meet the signal integrity requirements of the target application. Verify that the 670MHz bandwidth is sufficient for the highest frequency signals being switched.

Analog Switches, Multiplexers, Demultiplexers Part Context

The MAX4996ETG+T belongs to the MAX4996 family of triple DPDT analog switches designed for portable electronics. These devices combine low capacitance and low resistance to support high-frequency data switching. The ETG+T designation indicates a lead-free package in a 24-pin TQFN format. This family is optimized for applications requiring minimal signal distortion and low power consumption.