MAX542ACSD+

$37.03

Description：IC DAC 16BIT V-OUT 14SOIC
Series：-

SKU:c70594ff2b40 Category: Digital to Analog Converters (DAC) Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX542ACSD+ is listed in the Digital To Analog Converters range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC DAC 16BIT V-OUT 14SOIC. Review the specifications below when checking this part for your BOM.

Digital To Analog Converters specifications for MAX542ACSD+

Description：IC DAC 16BIT V-OUT 14SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Number of Bits：16
Number of D/A Converters：1
Settling Time：1µs (Typ)
Output Type：Voltage - Unbuffered
Differential Output：No
Data Interface：SPI
Reference Type：External
Voltage - Supply, Analog：5V
Voltage - Supply, Digital：5V
INL/DNL (LSB)：±0.5, ±0.5
Architecture：R-2R
Operating Temperature：0°C ~ 70°C
Package / Case：14-SOIC (0.154", 3.90mm Width)
Supplier Device Package：14-SOIC
Mounting Type：Surface Mount

Digital To Analog Converters datasheet and documents for MAX542ACSD+

MAX542ACSD+

Digital To Analog Converters Overview

The MAX542ACSD+ is a serial-input, voltage-output, 16-bit digital-to-analog converter (DAC) operating from a single +5V supply. It provides full 16-bit performance with ±1LSB INL and DNL over the commercial temperature range of 0°C to +70°C. The device features an unbuffered output with a typical supply current of 0.3mA and a settling time of 1µs. It utilizes a 3-wire serial interface compatible with SPI/QSPI/MICROWIRE standards. The MAX542 includes matched scaling resistors for bipolar operation with an external op amp and Kelvin-sense connections for reference and analog ground pins.

Digital To Analog Converters Feature Summary

Full 16-bit performance without adjustments
+5V single-supply operation
Low power consumption
Unbuffered voltage output directly drives 60kΩ loads
SPI/QSPI/MICROWIRE-compatible serial interface
Power-on reset circuit clears DAC output to 0V in unipolar mode
Schmitt trigger inputs for direct optocoupler interface

Digital To Analog Converters Applications

High-Resolution Offset and Gain Adjustment
Industrial Process Control
Automated Test Equipment
Data-Acquisition Systems

Digital To Analog Converters Procurement Notes

Verify the component authenticity by checking the manufacturer markings against official documentation. Ensure the package type matches the SOIC-14 specification. Confirm the temperature grade corresponds to the AC suffix for commercial applications. Cross-reference the ordering information to ensure compatibility with system requirements before procurement.

Digital To Analog Converters Selection Notes

Select the MAX542ACSD+ when 16-bit resolution and low power consumption are required in a compact surface-mount package. Consider the unbuffered output impedance when driving loads greater than 60kΩ. Use this component for applications requiring direct interfacing with optocouplers due to Schmitt trigger inputs. Verify that the external reference voltage falls within the specified range for optimal performance.

Digital To Analog Converters Part Context

The MAX542ACSD+ belongs to the MAX541/MAX542 family of 16-bit serial-input DACs. It shares architectural similarities with the MAX541 but includes additional features for bipolar operation. The AC suffix indicates a commercial temperature range of 0°C to +70°C. The SD suffix denotes a 14-pin SOIC package. This part is designed for applications requiring high accuracy and low power consumption.