ChipApex | Global Electronic Components Supplier
SEARCH
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：IC DGT POT 10KOHM 1024TP 14TSSOP
- Series：-
- Mfr：Analog Devices Inc./Maxim Integrated
- Package：Tape & Reel (TR),Cut Tape (CT)
- Taper：Linear
- Configuration：Potentiometer
- Number of Circuits：1
- Number of Taps：1024
- Resistance (Ohms)：10k
- Interface：SPI, Up/Down (U/D, INC, CS)
- Memory Type：Non-Volatile
- Voltage - Supply：2.7V ~ 5.25V, ±2.5V ~ 5.25V
- Features：-
- Tolerance：±25%
- Temperature Coefficient (Typ)：35ppm/°C
- Mounting Type：Surface Mount
- Supplier Device Package：14-TSSOP
- Package / Case：14-TSSOP (0.173", 4.40mm Width)
- Operating Temperature：-40°C ~ 85°C
- Resistance - Wiper (Ohms) (Typ)：50
- Grade：-
- Qualification：-
Download product information
Overview
The MAX5481EUD+T is a 10-bit, nonvolatile, linear-taper programmable voltage divider housed in a 14-pin TSSOP package. It features an internal EEPROM that retains the wiper position during power cycles. The device operates on a single +2.7V to +5.25V supply or ±2.5V dual supplies, consuming 1.0µA max standby current. It offers 10kΩ end-to-end resistance with a nominal temperature coefficient of 35ppm/°C and a ratiometric coefficient of 5ppm/°C. Communication is handled via a pin-selectable 3-wire SPI-compatible interface or up/down digital interface, supporting data rates up to 7MHz.
Feature Summary
- 10-bit resolution providing 1024 tap positions for precise control
- Nonvolatile memory stores wiper position for power-on recall
- Pin-selectable 3-wire SPI-compatible serial or up/down digital interface
- Low standby supply current of 1.0µA (max)
Applications
- Low-drift programmable gain amplifiers
- LCD contrast adjustment circuits
- Pressure sensor signal conditioning
- Gain and offset adjustment systems
Procurement Notes
Verify the suffix '+T' indicates tape-and-reel packaging when sourcing. Confirm the 'E' designation corresponds to the extended temperature range of -40°C to +85°C. Ensure the 'U' package code matches the required 14-pin TSSOP form factor for PCB layout compatibility.
Selection Notes
Select this component for applications requiring digitally controlled voltage division with retention capabilities. Choose between SPI and up/down interfaces based on available microcontroller pins. Ensure the load impedance connected to the wiper is high to prevent nonlinear voltage drops, as the device is not intended for significant wiper current flow.
Part Context
This part belongs to the MAX5481–MAX5484 family of 10-bit nonvolatile digital potentiometers. The MAX5481 variant specifically functions as a 3-terminal voltage divider with 10kΩ resistance. Other family members include the MAX5482 (50kΩ divider), MAX5483 (10kΩ variable resistor), and MAX5484 (50kΩ variable resistor).
Replacement Considerations
Direct functional substitutes within the same family include the MAX5482EUD+T for higher resistance requirements. For variable resistor configurations, consider the MAX5483EUD+T. Verify package compatibility if replacing with other series members.
