MAX9175EUB+

Signal Buffers, Repeaters, Splitters Overview

The MAX9175EUB+ is a 670MHz, low-jitter, low-skew 1:2 splitter manufactured by Analog Devices Inc./Maxim Integrated. It converts differential inputs (CML/LVDS/LVPECL) to LVDS outputs with ultra-low jitter of 1.0ps RMS and 80ps P-P at 800Mbps. Operating from a single +3.3V supply, it features power-down inputs compatible with LVTTL/LVCMOS logic that tolerate -1.0V undershoot and VCC + 1.0V overshoot. The device operates over the -40°C to +85°C temperature range in a 10-pin µMAX package.

Signal Buffers, Repeaters, Splitters Feature Summary

• Accepts differential CML, LVDS, or LVPECL input signals
• Provides dual LVDS outputs with integrated output resistor
• Includes power-down control for high-impedance state activation

Signal Buffers, Repeaters, Splitters Applications

• Protection switching
• Loopback testing
• Clock distribution networks

Signal Buffers, Repeaters, Splitters Procurement Notes

Verify the component matches the exact part number MAX9175EUB+. Confirm the manufacturer is Analog Devices Inc./Maxim Integrated. Ensure the package type is 10-pin µMAX. Check for RoHS compliance status. Validate the operating temperature range covers -40°C to +85°C.

Signal Buffers, Repeaters, Splitters Selection Notes

Select this component when an LVDS-compatible input is not required. Unlike the MAX9174, the MAX9175 accepts any differential signal format including CML and LVPECL. Use this part for clock distribution where low skew and jitter are critical. Ensure the system operates on a single +3.3V supply.

Signal Buffers, Repeaters, Splitters Part Context

This component belongs to the MAX9174/MAX9175 family of 670MHz LVDS splitters. It shares the same package and electrical characteristics as the MAX9174 but differs in input compatibility. The MAX9175 specifically supports non-LVDS differential inputs while maintaining LVDS outputs.

Signal Buffers, Repeaters, Splitters Replacement Considerations

The MAX9174EUB+ is a functional substitute if the input signal is strictly LVDS. Both parts share identical packages and power requirements. Verify input signal compatibility before substitution.