SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
MAX9209EUM+ is listed in the Serializers, Deserializers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SERIALIZER PROG 48-TSSOP. Review the specifications below when checking this part for your BOM.
The MAX9209EUM+T is a programmable DC-balanced serializer that converts 21 bits of LVTTL/LVCMOS parallel data into three LVDS serial outputs. It operates on a single +3.3V supply within the -40°C to +85°C temperature range and utilizes a 48-lead TSSOP package. The device supports throughput up to 1.785Gbps, with differential output resistance at 110Ω in DC-balanced mode and 410Ω in non-DC-balanced mode. Supply current reaches 100mA under worst-case conditions.
Verify the specific ordering suffix against official documentation to confirm package type and temperature rating. Confirm RoHS compliance status through manufacturer datasheets. Ensure compatibility with existing deserializer models like the MAX9210 or MAX9214 before finalizing procurement decisions.
Select this component when AC-coupling is required to tolerate ground shifts between serializer and deserializer. Choose the MAX9209EUM+T for applications needing pin compatibility with legacy DS90CR215/217 designs while adding programmable DC balance capabilities. Verify input voltage levels match the 5V tolerant LVTTL/LVCMOS specifications.
This part belongs to the MAX9209/MAX9213 family of 21-bit serializers designed for high-speed parallel-to-serial conversion. It pairs with companion deserializers such as the MAX9210 and MAX9214 to form complete video or data transmission links. The series addresses requirements for automotive and office equipment interfaces.
The MAX9209EUM+ serves as a direct pin-compatible replacement for the DS90CR215 and DS90CR217 when configured in non-DC-balanced mode. Designers should verify that the deserializer side matches the selected serialization mode.
DC balance is controlled by the DCB/NC pin. Driving it low selects non-DC-balanced mode, while leaving it high or open enables DC-balanced mode.
The device supports up to 1.785Gbps throughput, achieved via an 85MHz parallel clock in non-DC-balanced mode or 66MHz in DC-balanced mode.
No, the integrated Phase-Locked Loop (PLL) requires no external components to operate.
Explore related parts through Interface, Integrated Circuits (ICs), all product categories, ChipApex homepage.