MC100EP16VAMNR4G

Specialty Logic Overview

The MC100EP16VAMNR4G is a differential receiver/driver from the MC100EP16 series, manufactured by onsemi. It operates in PECL mode with VCC ranging from 3.0 V to 5.5 V (VEE = 0 V) and NECL mode with VEE from -3.0 V to -5.5 V (VCC = 0 V). The device features a typical propagation delay of 220 ps and supports maximum frequencies exceeding 4 GHz. It includes an internally generated VBB pin for reference voltage biasing and incorporates internal input clamps that force the Q output LOW under open input conditions.

Specialty Logic Feature Summary

• Functionally equivalent to EL16 and LVEL16 devices but offers significantly faster output transition times suitable for high-frequency source interfacing.
• Includes an internally generated VBB pin available exclusively to this device, allowing unused differential inputs to be connected as a switching reference or used to rebias AC coupled inputs.
• Features internal input clamps that ensure the Q output defaults to a LOW state when inputs are left open or pulled to VEE.

Specialty Logic Applications

• Interfacing with high frequency sources
• Differential signal reception and driving in ECL logic systems

Specialty Logic Procurement Notes

Verify the specific suffix 'VA' against the official datasheet to confirm exact electrical characteristics and package details, as ordering suffixes can denote variations in testing or packaging. Ensure compatibility with the required power supply configuration (PECL or NECL) before procurement. Confirm RoHS compliance status if environmental regulations apply to the final assembly.

Specialty Logic Selection Notes

Select this component when higher performance than EL16 or LVEL16 is required, specifically regarding output transition speeds. Consider the availability of the dedicated VBB pin for simplified biasing of single-ended or AC-coupled inputs. Evaluate the thermal requirements based on the DFN8 package type and operating temperature range of -40°C to +85°C.

Specialty Logic Part Context

This part belongs to the MC100EP16 family of world-class differential receiver/drivers. The 'MC100' prefix indicates it is part of the enhanced performance series compared to the standard MC10EP variants. The 'MN' suffix denotes the DFN8 package, while 'R4G' typically indicates tape and reel packaging with lead-free composition.

Specialty Logic Replacement Considerations

Public confirmed substitute part numbers: MC10EP16VAMNR4G, MC100EP16MNR4G.