MC14052BDG

$1.17

Description：IC SWITCH DP4T X 2 280OHM 16SOIC
Series：-

SKU:068f01796f12 Category: Analog Switches, Multiplexers, Demultiplexers Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MC14052BDG is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists onsemi. Its product description is IC SWITCH DP4T X 2 280OHM 16SOIC. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MC14052BDG

Description：IC SWITCH DP4T X 2 280OHM 16SOIC
Series：-
Mfr：onsemi
Package：Tube
Switch Circuit：DP4T
Multiplexer/Demultiplexer Circuit：2:04
On-State Resistance (Max)：280Ohm
Channel-to-Channel Matching (ΔRon)：10Ohm
Voltage - Supply, Single (V+)：3V ~ 18V
Voltage - Supply, Dual (V±)：-
Switch Time (Ton, Toff) (Max)：-
-3db Bandwidth：17MHz
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：7.5pF
Current - Leakage (IS(off)) (Max)：100nA
Crosstalk：-
Operating Temperature：-55°C ~ 125°C (TA)
Mounting Type：Surface Mount
Package / Case：16-SOIC (0.154", 3.90mm Width)
Supplier Device Package：16-SOIC
Number of Circuits：2
Grade：-
Qualification：-

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MC14052BDG

MC14052BDG

Analog Switches, Multiplexers, Demultiplexers Overview

The MC14052BDG is a dual 4-channel analog multiplexer/demultiplexer manufactured by onsemi in a 16-pin SOIC package. It operates within a supply voltage range of 3.0 Vdc to 18 Vdc and supports an analog voltage range of 3.0 V to 18 V. Key electrical parameters include a maximum ON resistance (Ron) of 280 ohms at 15 V, an OFF-channel leakage current (Ioff) of ±100 nA, and a -3 dB bandwidth of 17 MHz. The device features low noise performance with a typical value of 12 nV/√Hz at frequencies greater than or equal to 1.0 kHz.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Digitally controlled analog switching with break-before-make functionality
Integrated level conversion for direct control using standard CMOS logic levels
Triple diode protection implemented on all control inputs

Analog Switches, Multiplexers, Demultiplexers Applications

Signal routing in data acquisition systems
Audio signal path switching
Test and measurement equipment multiplexing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the component marking against the official datasheet diagram to confirm authenticity. Ensure the ordering suffix matches the required package type and lead-free status. Confirm that the specific revision of the datasheet aligns with the manufacturing date code found on the device surface.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a dual independent 4-to-1 analog switch configuration is required. It serves as a pin-for-pin replacement for CD4052 devices. For applications requiring lower ON resistance, consider the HC4052 series instead.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the MC1405xB family of analog switches, which also includes the single 8-channel MC14051B and the triple 2-channel MC14053B. All three share identical pinouts for control signals and similar electrical characteristics, allowing for flexible design choices within the same package footprint.