MC33204VDR2

Instrumentation, Op Amps, Buffer Amps Overview

The MC33204VDR2G is a quad low voltage operational amplifier from onsemi, featuring rail-to-rail input and output capabilities. It operates within a supply voltage range of +1.8 V to +12 V with ground. The device provides an output current capability of 80 mA typical and maintains a gain bandwidth product of 2.2 MHz. Input signals can be driven up to 200 mV beyond the supply rails without phase reversal. The extended temperature version supports operation from -55°C to +125°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Rail-to-rail input and output performance enables full utilization of the available supply voltage range.
• High output drive capability allows driving loads as low as 600 ohms with minimal distortion.
• Extended common mode input voltage range includes both supply rails without phase reversal.
• Low power consumption design suitable for single-supply battery-powered applications.

Instrumentation, Op Amps, Buffer Amps Applications

• Audio signal processing circuits requiring low noise and high drive capability
• Active filters and signal conditioning stages in portable devices
• Sensor interface amplifiers operating at low supply voltages
• Buffer stages for data acquisition systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the suffix 'V' indicates the extended temperature range (-55°C to +125°C) compared to the standard 'D' suffix. Confirm the 'R2G' designation corresponds to tape and reel packaging quantities specified in the ordering information section. Ensure the component meets AEC-Q100 qualification requirements if automotive application compliance is necessary.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when rail-to-rail input and output swing are required at low supply voltages. Consider the 80 mA output current for driving low impedance loads directly. Compare against dual-channel variants if fewer amplifiers are needed. Evaluate the 2.2 MHz gain bandwidth product against system speed requirements.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the MC33201/2/4 family of low voltage, rail-to-rail operational amplifiers manufactured by onsemi. The family includes single, dual, and quad configurations sharing identical electrical characteristics and pinouts where applicable. The NCV prefix denotes automotive qualification, while the base MC33204 designates the quad configuration.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

MC33204DG serves as the standard temperature variant in SOIC-14 packaging. MC33204DTBG offers the same functionality in TSSOP-14 packaging. NCV33204DR2G provides the extended temperature range in standard SOIC-14 tape and reel format.