MC74HC4060ADTR2G

Counter Dividers Overview

The MC74HC4060ADTR2G is a high-performance silicon-gate CMOS 14-stage binary ripple counter with an integrated oscillator, manufactured by onsemi. It operates within a supply voltage range of 2.0 V to 6.0 V and supports a maximum clock frequency of 50 MHz at 6.0 V. The device features asynchronous active-high reset functionality that disables the oscillator for low-power standby. It utilizes negative-edge triggering for state advancement and provides outputs Q4 through Q14, dividing the input frequency by powers of two. The component is housed in a 16-lead TSSOP package.

Counter Dividers Feature Summary

• Integrates a 14-stage binary ripple counter with master-slave flip-flops and an external RC or crystal oscillator circuit.
• Features asynchronous active-high reset capability that forces all outputs low and disables the internal oscillator.
• Outputs directly interface with standard CMOS, NMOS, and LSTTL loads without requiring level shifting.
• Provides dedicated oscillator output pins (Osc Out 1 and Osc Out 2) for frequency generation applications.

Counter Dividers Applications

• Frequency division circuits utilizing external crystals or RC networks.
• Timing and sequencing logic in digital systems.
• Clock signal generation and distribution networks.
• Binary counting operations in industrial control equipment.

Counter Dividers Procurement Notes

Verify the specific suffix 'DT' confirms the TSSOP-16 package variant rather than the SOIC-16 version. Ensure compliance with RoHS3 standards and confirm the absence of the '-Q' automotive suffix if general commercial use is intended. Validate moisture sensitivity level requirements against assembly process capabilities.

Counter Dividers Selection Notes

Select this component when a single-chip solution combining a counter and oscillator is required. Consider the 50 MHz maximum operating speed and 2.0 V to 6.0 V supply range for compatibility. Evaluate the propagation delay characteristics relative to system timing constraints. Confirm pinout compatibility with existing designs referencing the standard MC14060B layout.

Counter Dividers Part Context

This part belongs to the 74HC series of high-speed CMOS logic devices produced by onsemi. It serves as a direct functional equivalent to the legacy MC14060B in terms of pinout and logical operation. The device represents a modernized CMOS implementation offering improved noise immunity and lower power consumption compared to older bipolar technologies.

Counter Dividers Replacement Considerations

Nexperia offers the 74HC4060PW as a verified alternative. Verify package dimensions and electrical specifications match application requirements before substitution.