MCP3304-CI/P

$4.46

Description：IC ADC 13BIT SAR 16DIP
Series：-

SKU:48cde84fe6f0 Category: Analog to Digital Converters (ADC) Brand: Microchip Technology

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MCP3304-CI/P is listed in the Analog To Digital Converters (ADC) range at ChipApex. The manufacturer field lists Microchip Technology. Its product description is IC ADC 13BIT SAR 16DIP. Review the specifications below when checking this part for your BOM.

Analog To Digital Converters (ADC) specifications for MCP3304-CI/P

Description：IC ADC 13BIT SAR 16DIP
Series：-
Mfr：Microchip Technology
Package：Tube
Number of Bits：13
Sampling Rate (Per Second)：100k
Number of Inputs：4, 8
Input Type：Differential, Single Ended
Data Interface：SPI
Configuration：MUX-S/H-ADC
Ratio - S/H:ADC：1:01
Number of A/D Converters：1
Architecture：SAR
Reference Type：External
Voltage - Supply, Analog：5V
Voltage - Supply, Digital：5V
Features：-
Operating Temperature：-40°C ~ 85°C
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Mounting Type：Through Hole
Grade：-
Qualification：-

Analog To Digital Converters (ADC) datasheet and documents for MCP3304-CI/P

MCP3304-CI/P

Analog To Digital Converters (ADC) Overview

The MCP3304-CI/P is a 13-bit successive approximation analog-to-digital converter (ADC) manufactured by Microchip Technology. It features four full differential input pairs or eight single-ended inputs, configurable via the SPI serial interface. The device operates on a single supply voltage ranging from 4.5V to 5.5V for specified performance, with a maximum sampling rate of 100 ksps at 5V. Key electrical specifications include ±1 LSB maximum Integral Nonlinearity (INL) and Differential Nonlinearity (DNL). The component is housed in a 16-pin PDIP package and supports an industrial operating temperature range of -40°C to +85°C.

Analog To Digital Converters (ADC) Feature Summary

13-bit resolution with ±1 LSB maximum INL and DNL
Four differential or eight single-ended programmable inputs
SPI serial interface compatible with standard microcontrollers
Low power consumption: 450 µA max active current at 5V

Analog To Digital Converters (ADC) Applications

Remote data acquisition systems
Battery-operated instrumentation
Transducer interfaces

Analog To Digital Converters (ADC) Procurement Notes

Verify that the ordering suffix 'CI' corresponds to the Industrial Temperature Grade (-40°C to +85°C) as defined in the official datasheet. Confirm the package type matches the 16-pin PDIP specification. Ensure the supply voltage meets the 4.5V to 5.5V requirement for guaranteed performance parameters.

Analog To Digital Converters (ADC) Selection Notes

Select the MCP3304 over the MCP3302 when four differential channels are required. Ensure the system clock frequency does not exceed 2.1 MHz at 5V. Verify that the source impedance allows for sufficient acquisition time within the 1.5 clock cycle window to maintain linearity specifications.

Analog To Digital Converters (ADC) Part Context

This component belongs to the MCP3302/04 family of low-power, high-precision ADCs. The 'C' grade indicates ±2 LSB maximum INL, while the 'I' suffix denotes the industrial temperature rating. The '/P' suffix specifies the plastic dual in-line package format.