MCP48CVB01-E/UN

$0.62

Description：IC DAC 8BIT 10MSOP
Series：-

SKU:477a65a7054f Category: Digital to Analog Converters (DAC) Brand: Microchip Technology

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MCP48CVB01-E/UN is listed in the Digital To Analog Converters range at ChipApex. The manufacturer field lists Microchip Technology. Its product description is IC DAC 8BIT 10MSOP. Review the specifications below when checking this part for your BOM.

Digital To Analog Converters specifications for MCP48CVB01-E/UN

Description：IC DAC 8BIT 10MSOP
Series：-
Mfr：Microchip Technology
Package：Tube
Number of Bits：8
Number of D/A Converters：1
Settling Time：16µs
Output Type：-
Differential Output：No
Data Interface：SPI
Reference Type：External, Internal
Voltage - Supply, Analog：-
Voltage - Supply, Digital：-
INL/DNL (LSB)：±0.1, ±0.1
Architecture：-
Operating Temperature：-40°C ~ 125°C
Package / Case：10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package：10-MSOP
Mounting Type：Surface Mount
Grade：-
Qualification：-

Digital To Analog Converters datasheet and documents for MCP48CVB01-E/UN

MCP48CVB01-E/UN

Digital To Analog Converters Overview

The MCP48CVB01-E/UN is a single-channel, 8-bit volatile Digital-to-Analog Converter (DAC) manufactured by Microchip Technology. It features a buffered voltage output and operates on an SPI serial interface with write speeds up to 50 MHz. The device supports analog and digital supply voltages ranging from 2.7V to 5.5V for full specifications, or 1.8V to 2.7V for reduced specifications. It includes an internal band gap reference of 1.214V typical and allows external VREF selection. The component is housed in a 10-lead MSOP package and is rated for extended operating temperatures between -40°C and +125°C.

Digital To Analog Converters Feature Summary

Integrated WiperLock™ technology synchronizes the DAC register update with the LAT pin signal.
Configurable power-down modes allow high-impedance output isolation or connection to internal pull-down resistors.
Flexible reference input options include the device VDD, an external VREF pin, or an internal band gap source.

Digital To Analog Converters Applications

Set point or offset trimming
Sensor calibration
Low-power portable instrumentation

Digital To Analog Converters Procurement Notes

Verify the specific ordering suffix against official documentation to confirm package type and temperature range. Ensure that any non-standard packaging requirements are explicitly stated during procurement. Confirm RoHS compliance status through the manufacturer's latest release notes before finalizing orders.

Digital To Analog Converters Selection Notes

Select this model when a single-channel 8-bit resolution is required with volatile memory storage. Verify that the system design accommodates the 10-lead MSOP footprint. Ensure the application logic can drive the LAT pin for synchronized updates if utilizing WiperLock functionality.

Digital To Analog Converters Part Context

This component belongs to the MCP48CXBXX family of 8, 10, and 12-bit DACs. It shares architectural similarities with dual-channel variants and nonvolatile MTP versions within the same series. The 'CV' designation specifically indicates volatile RAM-based data retention without onboard nonvolatile storage capabilities.

Digital To Analog Converters FAQ

What is the function of the LAT/HVC pin?

The LAT pin acts as a latch control for WiperLock technology to synchronize DAC updates. When used for MTP programming, it accepts a high-voltage input typically around 7.5V.

How does the device handle power-on reset conditions?

The device incorporates Power-on Reset (POR) and Brown-out Reset (BOR) protection to ensure stable operation during voltage transitions and low-voltage events.