MCP6001T-E/OT

Instrumentation, Op Amps, Buffer Amps Overview

The MCP6001T-E/OT is a single-channel operational amplifier from the MCP6001 family, manufactured using Microchip CMOS technology. It features a 1 MHz Gain Bandwidth Product and 90° phase margin (typical). The device supports rail-to-rail input and output swing with a common-mode range extending to VDD + 300 mV and VSS - 300 mV. It operates on a single supply voltage ranging from 1.8V to 6.0V while consuming 100 µA typical quiescent current. The component is qualified under AEC-Q100 standards for automotive applications and is available in a 5-lead SOT-23 package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Rail-to-rail input and output capability allows full signal swing across the supply range.
• High stability with 90° phase margin at unity gain and maintained 45° phase margin with capacitive loads.
• Low power consumption suitable for battery-operated systems with minimal quiescent current draw.
• Robust input protection prevents phase reversal when input voltages exceed supply rails.

Instrumentation, Op Amps, Buffer Amps Applications

• Automotive electronics
• Photodiode amplifiers
• Active analog filters
• Portable equipment

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify that the ordering suffix matches the required temperature grade and package configuration. Confirm the specific date code requirements if manufacturing lot traceability is necessary for your production line. Ensure the component meets RoHS compliance standards relevant to your target market regulations before finalizing procurement orders.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for general-purpose applications requiring low power and wide bandwidth. Consider the extended temperature range variant if operation above 85°C is required. Evaluate the need for AEC-Q100 qualification based on automotive system specifications. Verify that the SOT-23 package dimensions fit within the available PCB real estate constraints.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the MCP6001/1R/1U/2/4 family of low-power operational amplifiers. The family includes single, dual, and quad configurations available in various packages such as SC-70, SOT-23, SOIC, and DFN. All variants share the same core electrical characteristics, including 1 MHz bandwidth and rail-to-rail performance, designed for cost-effective general-purpose use.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Direct substitutes include other members of the MCP6001 family such as MCP6001UT-I/OT or MCP6001T-I/LT, depending on the required temperature range and package type. Cross-referencing pinouts and electrical specifications is essential when replacing with non-Microchip components.

Instrumentation, Op Amps, Buffer Amps FAQ

Does the MCP6001T-E/OT experience phase reversal?

No, the device is designed to prevent phase reversal even when input pins exceed the supply voltages.

What is the maximum capacitive load the device can drive?

It maintains a typical 45° phase margin with a 500 pF capacitive load. Larger loads may require an isolation resistor for stability.