MCP6293-E/MS

Instrumentation, Op Amps, Buffer Amps Overview

The MCP6293-E/MS is a single-channel operational amplifier from the MCP6291 family, manufactured by Microchip Technology. It features a typical gain bandwidth product of 10 MHz and a slew rate of 7 V/µs. The device operates on a supply voltage range of 2.4V to 6.0V with a typical quiescent current of 1.0 mA per amplifier. It supports rail-to-rail input and output swing, offering an extended operating temperature range from -40°C to +125°C. The component includes a Chip Select (CS) pin for low-power mode control.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Features a Chip Select (CS) digital input that enables low-power shutdown mode when driven high.
• Supports rail-to-rail input and output voltage swings within the supply voltage range.
• Designed with CMOS process technology to provide wide bandwidth relative to its power consumption.

Instrumentation, Op Amps, Buffer Amps Applications

• Automotive systems requiring AEC-Q100 Grade 1 qualification
• Photodiode amplifier circuits
• Analog filter implementations
• Battery-powered portable equipment

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'E' corresponds to the extended temperature range (-40°C to +125°C) as defined in the manufacturer's datasheet. Confirm the package type matches the required MSOP-8 footprint. Ensure the design accounts for the Chip Select logic thresholds if active low-power management is utilized in the system architecture.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when a single op amp configuration with integrated power-down capability is required. It is suitable for applications needing 10 MHz bandwidth and rail-to-rail performance under single-supply conditions. Consider the MCP6295 if dual-channel functionality with cascaded outputs is needed instead.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the MCP6291/1R/2/3/4/5 family of 1.0 mA, 10 MHz Rail-to-Rail Op Amps. The family includes single, dual, and quad variants. The MCP6293 specifically denotes the single-channel version equipped with a Chip Select pin, distinguishing it from the standard MCP6291 which lacks this control feature.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

MCP6295T-E/MS

Instrumentation, Op Amps, Buffer Amps FAQ

What is the function of the CS pin on the MCP6293?

The CS pin is a CMOS Schmitt-triggered digital input that places the amplifier into a low-power mode when driven high, reducing quiescent current and setting the output to a high-impedance state.

Does the MCP6293 exhibit phase reversal?

No, the device is designed to prevent phase reversal even when input pins exceed the supply voltages.