MCP6G04T-E/ST

Overview

The MCP6G04T-E/ST is a quad selectable gain amplifier in a 14-pin TSSOP package. It supports gains of +1, +10, and +50 V/V via the GSEL pin. Operating on a single supply from 1.8V to 5.5V, it features rail-to-rail input and output. Key electrical parameters include a typical quiescent current of 110 µA per amplifier, an input offset voltage of ±4.5 mV at G=+1, and a bandwidth ranging from 250 kHz to 900 kHz depending on the selected gain.

Feature Summary

• Configurable for three fixed non-inverting gains: +1, +10, and +50 V/V through a dedicated Gain Select input.
• Provides full rail-to-rail signal swing capability on both the input and output stages.
• Optimized for low power consumption with a typical quiescent current of 110 µA per channel.

Applications

• A/D Converter Driver
• Industrial Instrumentation
• Bar Code Readers

Procurement Notes

Verify the specific ordering suffix 'T' confirms tape and reel packaging rather than tube. Confirm the '-E' suffix indicates the extended industrial temperature range of -40°C to +125°C. Ensure the datasheet revision matches the required specifications for your design implementation.

Selection Notes

Select this component when multiple independent gain settings are required within a single integrated circuit. The quad configuration reduces board space compared to discrete solutions. Verify that the available bandwidth at the chosen gain setting meets the signal frequency requirements.

Part Context

This part belongs to the MCP6G01/1R/1U/2/3/4 family of analog selectable gain amplifiers manufactured by Microchip Technology. While other variants offer single or dual channels in smaller packages, the MCP6G04 specifically provides four independent amplifier circuits in a 14-lead Thin Shrink Small Outline Package (TSSOP).

Replacement Considerations

Direct functional replacements within the same family include MCP6G04-E/ST (tube) or MCP6G04-E/MF (MSOP). Cross-family replacement requires verifying gain options and pinout compatibility.