MCR25MG

$3.44

Description：SCR 600V 25A TO220AB
Series：-

SKU:c45fa865a248 Category: SCRs Brand: Littelfuse Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：SCR 600V 25A TO220AB
Series：-
Mfr：Littelfuse Inc.
Package：Box
Voltage - Off State：600 V
Voltage - Gate Trigger (Vgt) (Max)：1 V
Current - Gate Trigger (Igt) (Max)：30 mA
Current - Hold (Ih) (Max)：40 mA
Current - Non Rep. Surge 50, 60Hz (Itsm)：300A @ 60Hz
SCR Type：Standard Recovery
Operating Temperature：-40°C ~ 125°C
Mounting Type：Through Hole
Package / Case：TO-220-3
Supplier Device Package：TO-220AB
Voltage - On State (Vtm) (Max)：1.8 V
Current - On State (It (AV)) (Max)：-
Current - On State (It (RMS)) (Max)：25 A
Current - Off State (Max)：10 µA

Download product information

MCR25MG

Overview

The Littelfuse MCR25MG is a silicon-controlled rectifier (SCR) housed in a TO-220AB package. It features a peak repetitive off-state voltage of 600 V and an on-state RMS current rating of 25 A at a case temperature of 80°C. The device supports a peak non-repetitive surge current of 300 A and operates within a junction temperature range of -40°C to 125°C. Electrical characteristics include a maximum gate trigger current of 30 mA, a holding current of 40 mA, and a critical rate of rise of off-state voltage of 100 V/µs at 125°C. Thermal resistance from junction to case is 1.5 °C/W.

Feature Summary

Glass passivated junctions for reliability and uniformity
Specified minimum and maximum values for gate trigger current, gate trigger voltage, and holding current
High immunity to dv/dt with a minimum rating of 100 V/µsec at 125°C

Applications

Half-wave AC control applications
Motor controls
Heating controls
Power supplies

Procurement Notes

Verify the specific part number against official Littelfuse documentation to confirm the 600V blocking voltage rating associated with the MCR25MG suffix. Ensure that the TO-220AB package dimensions and lead configuration match the required PCB layout specifications before finalizing procurement decisions.

Selection Notes

Select this component when a 600V blocking voltage and 25A continuous current capacity are required in a TO-220AB form factor. Consider the specified thermal resistance and derating curves for proper heat sink sizing. Verify that the gate drive circuitry can supply the necessary trigger current and voltage levels defined in the electrical characteristics table.

Part Context

The MCR25MG belongs to the MCR25DG, MCR25MG, and MCR25NG family of silicon-controlled rectifiers. These devices share identical physical packages and current ratings but differ in their peak repetitive off-state voltage capabilities, which are 400V, 600V, and 800V respectively. This family is designed for rugged, economical half-wave AC control applications.