MCT6H

$1.28

Description：OPTOISOLTR 5.3KV 2CH TRANS 8-DIP
Series：-
Mfr：Vishay Semiconductor Opto Division
Package：Tube

SKU:2f0b93da44a6 Category: Transistor, Photovoltaic Output Optoisolators Brand: Vishay Semiconductor Opto Division

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MCT6H is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Vishay Semiconductor Opto Division. Its product description is OPTOISOLTR 5.3KV 2CH TRANS 8-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MCT6H

Description：OPTOISOLTR 5.3KV 2CH TRANS 8-DIP
Series：-
Mfr：Vishay Semiconductor Opto Division
Package：Tube
Number of Channels：2
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：50% @ 5mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：6µs, 5µs
Rise / Fall Time (Typ)：3µs, 4.7µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.25V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：300mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MCT6H

MCT6H

Transistor, Photovoltaic Output Optoisolators Overview

The MCT6H is a dual-channel transistor output optocoupler manufactured by Vishay Semiconductor Opto Division. It features NPN phototransistor outputs with a minimum current transfer ratio of 100% at 5mA input current. The device provides 5300 Vrms isolation voltage and operates within a temperature range of -40°C to +100°C. Key electrical parameters include a maximum collector-emitter voltage of 70V, a forward current of 60mA, and a forward voltage of 1.6V. Rise and fall times are specified as 3µs and 4.7µs respectively. The component is housed in an 8-pin PDIP package.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Dual independent channels for simultaneous signal isolation
High insulation voltage capability for safety-critical applications
NPN phototransistor output configuration

Transistor, Photovoltaic Output Optoisolators Applications

Industrial control systems requiring galvanic isolation
Power supply feedback loops
Signal interface between microcontrollers and high-voltage circuits

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific ordering suffix and RoHS compliance status directly with the manufacturer or authorized distributors. Confirm that the component meets all required environmental specifications for the intended application environment before finalizing procurement decisions.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when dual-channel isolation with high CTR is required. Ensure the system design accommodates the specified rise and fall times. Verify that the 70V collector-emitter voltage rating exceeds the maximum load voltage in the target circuit application.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the Vishay MCT series of optocouplers, designed for general-purpose isolation tasks. It utilizes standard DIP packaging for through-hole mounting, facilitating integration into legacy and modern PCB designs requiring reliable electrical separation between low-voltage control logic and higher-voltage power stages.