MDF2016BSS180CTD25

Chip Ferrite Bead Overview

The MDF2016BSS180CTD25 is a ferrite bead from the MDF series manufactured by TDK Corporation. It features a 0806 (2016 metric) surface-mount package with dimensions of 2.00mm length, 1.60mm width, and 0.60mm height. The component provides an impedance of 200 Ohms at a test frequency of 2MHz and supports a maximum DC current of 1.1A. Its maximum DC resistance is specified at 0.2 Ohms. The device operates within a temperature range of -55°C to +125°C and complies with RoHS3 standards.

Chip Ferrite Bead Feature Summary

• Provides high noise suppression performance in the low-frequency range through specialized material composition.
• Designed for surface-mount assembly using standard 0806 footprint dimensions.
• Capable of handling continuous currents up to 1.1A without saturation.

Chip Ferrite Bead Applications

• Noise suppression on power supply lines
• Signal line filtering in electronic circuits
• EMI reduction in compact consumer electronics

Chip Ferrite Bead Procurement Notes

Verify the specific impedance value against official datasheets, as distributor listings may contain conflicting data regarding the 18 Ohm versus 200 Ohm specifications. Confirm the package height and current rating match the design requirements before ordering. Ensure the supplier provides documentation confirming RoHS3 compliance and AEC-Q200 qualification if automotive reliability is required.

Chip Ferrite Bead Selection Notes

Select this component when a 0806 footprint is available and significant attenuation is needed at frequencies around 2MHz. The 1.1A current rating makes it suitable for moderate power applications where space is constrained. Compare the 0.2 Ohm DC resistance against circuit loss tolerances to ensure voltage drop remains within acceptable limits during operation.

Chip Ferrite Bead Part Context

This part belongs to the MDF series of ferrite beads, which are engineered for general-purpose noise suppression. The series offers various impedance values and current ratings in standardized metric packages. The MDF2016BSS180CTD25 specifically targets applications requiring robust low-frequency filtering capabilities in a compact form factor suitable for automated surface-mount production.

Chip Ferrite Bead Replacement Considerations

Consult official substitution guides for equivalent parts with matching 200 Ohm impedance at 2MHz and 1.1A current capacity. Verify that alternative components fit the 2016 metric package dimensions and maintain similar thermal characteristics.

Chip Ferrite Bead FAQ

What is the test frequency for the impedance specification?

The impedance of 200 Ohms is measured at a test frequency of 2MHz.

Does this component support automotive applications?

Yes, the MDF series is qualified under the AEC-Q200 standard for passive components.