ME-SA2-D6-7I-D11-R1

Overview

The Enclustra ME-SA2-D6-7I-D11-R1 is a Mercury+ SA2 System-on-Chip module based on the Intel Cyclone V SoC device (5CSTFD6D5F31I7N). It integrates an ARM dual-core Cortex-A9 processor and a 28nm FPGA fabric. The module includes 2 GB of DDR3L SDRAM, 64 MB quad SPI flash, a Cypress FX3 USB 3.0 controller, Gigabit Ethernet, and dual Fast Ethernet interfaces. It supports PCIe Gen2 x4 via nine multi-gigabit transceivers operating up to 6.144 Gbit/sec. Designed for industrial environments, it operates within a temperature range of -40°C to +85°C and accepts a supply voltage between 5 V and 15 V DC.

Feature Summary

• Intel Cyclone V SoC with ARM Cortex-A9 and 28nm FPGA fabric
• 2 GB DDR3L SDRAM and 64 MB QSPI Flash memory
• Cypress EZ-USB FX3 USB 3.0 controller and PHY
• Gigabit Ethernet and Dual Fast Ethernet connectivity
• PCIe Gen2 x4 interface with 9 MGTs at 6.144 Gbit/sec

Applications

• Embedded processing systems requiring real-time parallel processing
• Industrial automation and control applications
• High-speed data acquisition and communication links
• Prototyping platforms for FPGA-based designs

Procurement Notes

Verify the specific revision suffix 'R1' against the manufacturer's current documentation, as earlier revisions may have known issues or unavailability notices. Confirm that the EN-number corresponds to the exact hardware configuration required for the target application. Ensure compliance with RoHS directives and proper disposal procedures according to WEEE standards are followed during integration.

Selection Notes

Select this module when a compact form factor (74 × 54 mm) is required alongside high-bandwidth I/O capabilities. It is suitable for designs needing both CPU processing power and FPGA flexibility. Consider the 5–15 V input voltage range for power supply design. Verify baseboard compatibility using the Hirose FX10 connector specifications and ensure adequate thermal management for the industrial temperature range.

Part Context

This part belongs to the Mercury+ SA2 product line from Enclustra. It utilizes the Altera Cyclone V ARM Processor-based SoC FPGA. The module is designed to simplify system design by providing a complete embedded processing solution in a space-saving form factor. It is supported by the Enclustra Build Environment for Linux setup and Quartus Prime software tools.

Replacement Considerations

No public confirmed substitute part numbers are available in the provided documentation. Custom configurations may be requested directly from Enclustra. Users should verify pinout and mechanical footprint compatibility if considering alternative modules from the same family.