ME-ZX1-30-2I-D10-R3

Microcontrollers, Microprocessor, FPGA Modules Overview

The Enclustra ME-ZX1-30-2I-D10-R3 is a System-on-Module (SoM) based on the AMD Zynq XC7Z030-2 All Programmable SoC. It integrates an ARM Cortex-A9 MPCore and a Kintex-7 FPGA fabric within a 64x54mm footprint. The module provides 1GB of DDR3 SDRAM for the Processing System and 256MB for the Programmable Logic. Key interfaces include PCIe Gen2 x4/x8, Gigabit Ethernet, dual Fast Ethernet, USB 2.0 OTG, and up to 20 Multi-Gigabit Transceivers (MGTs). It operates in industrial temperature ranges (-40°C to +85°C) and accepts a single 5V to 15V supply voltage.

Microcontrollers, Microprocessor, FPGA Modules Feature Summary

• AMD Zynq XC7Z030-2 SoC with dual ARM Cortex-A9 processors and Kintex-7 FPGA fabric
• Memory configuration: 1GB PS DDR3 SDRAM and 256MB PL DDR3 SDRAM
• Interfaces: PCIe Gen2 x4/x8, Gigabit Ethernet, Dual Fast Ethernet, USB 2.0 OTG
• Industrial operating temperature range from -40°C to +85°C

Microcontrollers, Microprocessor, FPGA Modules Applications

• Embedded processing systems requiring high I/O density
• Communication applications utilizing Gigabit Ethernet and PCIe
• Prototyping platforms for Zynq-7000 SoC devices

Microcontrollers, Microprocessor, FPGA Modules Procurement Notes

Verify the specific revision suffix '-R3' against the manufacturer's EN-number list (EN101724) to ensure hardware compatibility with baseboards. Confirm that the required Vivado ML Standard Edition tool support aligns with project licensing constraints. Check mechanical mounting hole alignment on the target carrier board to prevent incorrect orientation during installation.

Microcontrollers, Microprocessor, FPGA Modules Selection Notes

Select this model over higher-density variants (ME-ZX1-35 or ME-ZX1-45) if the application requires free Vivado ML Standard Edition tooling, as the Zynq-7030 device does not require paid licenses. Ensure the design utilizes only the 170 user I/Os available on the Zynq-7030, as the -35 and -45 models offer increased pin counts. Verify that the 20 MGT signals are sufficient for the required transceiver bandwidth.

Microcontrollers, Microprocessor, FPGA Modules Part Context

This module belongs to the Mercury ZX1 family, designed to reduce development effort for Zynq-7000 SoC implementations. It serves as a complete embedded processing system that simplifies hardware design by integrating memory, flash, and standard interfaces onto a compact carrier card. The module is intended for use with compatible Mercury base boards such as the PE1, PE3, or ST1 series.

Microcontrollers, Microprocessor, FPGA Modules Replacement Considerations

Direct replacements within the same form factor include ME-ZX1-35-1I-D10-R3 and ME-ZX1-45-2I-D10-P-R3. Note that these alternatives feature different SoC densities (XC7Z035 and XC7Z045), which may require paid Vivado licenses and offer different I/O counts. Pin-to-pin compatibility exists within the Mercury ZX1 series, allowing for potential upgrades without redesigning the baseboard.