MMZ1608Y751BTA00

Overview

The MMZ1608Y751BTA00 is a single-line ferrite chip bead manufactured by TDK Corporation, designed for general signal line applications. It features a 0603 (1608 metric) surface-mount package with dimensions of 1.6 mm length, 0.8 mm width, and 0.8 mm height. The component provides an impedance of 750 Ohms at a test frequency of 100 MHz with a tolerance of 25%. It supports a maximum DC current of 500 mA and has a maximum DC resistance of 450 mOhms. The device operates within a temperature range of -55°C to +125°C.

Feature Summary

• Provides high impedance attenuation for noise suppression on general signal lines
• Constructed in a compact 0603 surface-mount footprint for space-constrained designs
• Capable of handling continuous DC currents up to 500 mA without saturation

Applications

• Noise filtering for general-purpose digital signal lines
• EMI suppression in portable electronic devices
• Signal integrity enhancement in consumer electronics

Procurement Notes

Verify the complete part number against official TDK documentation to ensure correct impedance and tolerance specifications. Confirm that the 0603 package size aligns with the target PCB land pattern. Check for RoHS compliance status if required by specific regional regulations or end-product standards before finalizing procurement.

Selection Notes

Select this component when a 750 Ohm impedance at 100 MHz is required for signal line noise reduction. Ensure the circuit's operating current does not exceed the 500 mA rating to prevent performance degradation. Verify that the 0603 package dimensions fit the available board space and that the -55°C to +125°C operating range meets environmental requirements.

Part Context

This component belongs to the TDK MMZ series of ferrite beads, which are widely used for electromagnetic interference suppression. The MMZ series offers various impedance values and current ratings in standard surface-mount packages. The MMZ1608Y751BTA00 specifically targets applications requiring moderate current handling with high-frequency noise attenuation in a small form factor.

Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Cross-referencing requires matching impedance, current rating, and package dimensions using official manufacturer substitution guides.