MOC215M

$0.17

Description：OPTOISO 2.5KV TRANS W/BASE 8SOIC
Series：-
Mfr：onsemi
Package：Tube

SKU:0f62fcae0a01 Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC215M is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 2.5KV TRANS W/BASE 8SOIC. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOC215M

Description：OPTOISO 2.5KV TRANS W/BASE 8SOIC
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：1
Voltage - Isolation：2500Vrms
Current Transfer Ratio (Min)：20% @ 1mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：4µs, 4µs
Rise / Fall Time (Typ)：3µs, 3µs
Input Type：DC
Output Type：Transistor with Base
Voltage - Output (Max)：30V
Current - Output / Channel：150mA
Voltage - Forward (Vf) (Typ)：1.07V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：400mV
Operating Temperature：-40°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOC215M

MOC215M

Transistor, Photovoltaic Output Optoisolators Overview

The onsemi MOC215M is a single-channel transistor output optocoupler housed in an 8-SOIC surface-mount package. It provides 2500 Vrms isolation voltage between input and output circuits. The device features an NPN phototransistor output with a base terminal, supporting a maximum collector current of 150 mA and a collector-emitter voltage of 30 V. It operates within a temperature range of -40°C to +100°C and has a typical rise/fall time of 3 µs/3 µs.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides galvanic isolation for signal transmission between low-voltage control circuits and higher-voltage loads.
Integrates an NPN phototransistor output with a dedicated base pin for enhanced switching speed and noise immunity.
Designed for surface-mount assembly in compact electronic designs requiring reliable DC input to transistor output coupling.

Transistor, Photovoltaic Output Optoisolators Applications

Solid-state relay driver circuits
Industrial process control signal isolation
Power supply feedback loop isolation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix (e.g., M vs VM) against the manufacturer's current production status, as variants may differ in packaging or availability. Confirm RoHS compliance and lead times directly with authorized distributors, as obsolete status can impact long-term supply continuity.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a single-channel isolated interface with a phototransistor output is required. Ensure the load voltage does not exceed 30 V and the current remains within the 150 mA limit. Consider the 2500 Vrms isolation rating for safety requirements in mains-connected applications.

Transistor, Photovoltaic Output Optoisolators Part Context

The MOC215M belongs to the MOC215/16/17-M series of transistor output optocouplers from onsemi. These devices are widely used in general-purpose isolation applications where cost-effective, reliable signal transfer across electrical barriers is necessary.