MOC3011FR2VM

Description：OPTOISOLTR 7.5KV TRIAC 1CH 6-SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:fa991482ec75 Category: Triac, SCR Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC3011FR2VM is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLTR 7.5KV TRIAC 1CH 6-SMD. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for MOC3011FR2VM

Description：OPTOISOLTR 7.5KV TRIAC 1CH 6-SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
Output Type：Triac
Zero Crossing Circuit：No
Number of Channels：1
Voltage - Isolation：7500Vpk
Voltage - Off State：250 V
Static dV/dt (Min)：-
Current - LED Trigger (Ift) (Max)：10mA
Current - On State (It (RMS)) (Max)：-
Current - Hold (Ih)：100µA (Typ)
Turn On Time：-
Voltage - Forward (Vf) (Typ)：-
Current - DC Forward (If) (Max)：60 mA
Operating Temperature：-
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：6-SMD
Approval Agency：-

Triac, SCR Output Optoisolators datasheet and documents for MOC3011FR2VM

MOC3011FR2VM

Triac, SCR Output Optoisolators Overview

The MOC3011FR2VM is a single-channel Triac and SCR output optocoupler manufactured by onsemi. It features a PhotoTriac output designed for non-zero-crossing applications, allowing triggering at any point in the AC cycle. The device provides high isolation with a rated insulation voltage of 7500Vpk. Key electrical parameters include a forward current of 60 mA, a forward voltage of 1.15 V, and a power dissipation of 330 mW. The off-state output voltage (VDRM) is rated at 250 V. The component is housed in a 6-SMD surface-mount package.

Triac, SCR Output Optoisolators Feature Summary

Non-zero-crossing triac output capability for flexible phase control
High voltage isolation rating of 7500Vpk between input and output
Surface-mount 6-SMD package design for automated assembly

Triac, SCR Output Optoisolators Applications

Solid-state relay (SSR) driver circuits
AC motor speed control systems
Lighting dimmer applications requiring random phase triggering

Triac, SCR Output Optoisolators Procurement Notes

Verify availability status carefully as this specific part number may be obsolete or discontinued. Check for valid substitute part numbers such as MOC3011SR2VM if direct procurement is not possible. Confirm that the replacement matches the required package type and electrical specifications to ensure circuit compatibility without redesign.

Triac, SCR Output Optoisolators Selection Notes

Select this component when non-zero-crossing switching is required for precise AC phase control. Ensure the application voltage does not exceed the 250 V off-state rating. Verify that the load current requirements are within the capabilities of the internal PhotoTriac. Consider the 6-SMD footprint constraints during PCB layout design.

Triac, SCR Output Optoisolators Part Context

This device belongs to the MOC3011 series of Triac and SCR output optocouplers from onsemi. It is distinct from zero-crossing variants like the MOC3021 series. The FR2 suffix indicates the specific surface-mount packaging configuration. It serves as an interface component between low-voltage logic circuits and higher-voltage AC loads.