ChipApex | Global Electronic Components Supplier
SEARCH
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
MOC3030XG is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists Isocom Components 2004 LTD. Its product description is OPTOISOLTR 5.3KV TRIAC 1CH 6-DIP. Review the specifications below when checking this part for your BOM.
Triac, SCR Output Optoisolators specifications for MOC3030XG
- Description：OPTOISOLTR 5.3KV TRIAC 1CH 6-DIP
- Series：MOC3030
- Mfr：Isocom Components 2004 LTD
- Package：Tube
- Output Type：Triac
- Zero Crossing Circuit：Yes
- Number of Channels：1
- Voltage - Isolation：5300Vrms
- Voltage - Off State：250 V
- Static dV/dt (Min)：600V/µs
- Current - LED Trigger (Ift) (Max)：30mA
- Current - On State (It (RMS)) (Max)：-
- Current - Hold (Ih)：400µA (Typ)
- Turn On Time：-
- Voltage - Forward (Vf) (Typ)：1.2V
- Current - DC Forward (If) (Max)：50 mA
- Operating Temperature：-40°C ~ 100°C
- Mounting Type：Through Hole
- Package / Case：6-DIP (0.400", 10.16mm)
- Supplier Device Package：6-DIP
- Approval Agency：UL, VDE
Triac, SCR Output Optoisolators datasheet and documents for MOC3030XG
Triac, SCR Output Optoisolators Overview
The MOC3030XG is a zero-crossing triac output optoisolator manufactured by Isocom Components 2004 LTD. It features a single channel with a 6-pin DIP package and through-hole mounting. The device provides an isolation voltage of 5300Vrms. Typical forward voltage is 1.2V, with a maximum input current of 60mA. Operating temperature ranges from -40°C to 100°C. Rise and fall times are typically 2μs. Certifications include EN60950, CECC 00802, UL (E91231), and VDE 0884.
Triac, SCR Output Optoisolators Feature Summary
- Zero-crossing detection for reduced electromagnetic interference during switching
- High isolation voltage capability for safety in mains applications
- Triac output suitable for AC load control
Triac, SCR Output Optoisolators Applications
- Solid state relay circuits
- AC motor speed control
- Lighting dimmer circuits
Triac, SCR Output Optoisolators Procurement Notes
Verify the manufacturer designation as Isocom Components 2004 LTD against official datasheets. Confirm the 6-DIP package type and zero-crossing functionality match system requirements. Check certification compliance such as UL and VDE for specific regional regulations. Ensure operating temperature range meets environmental conditions.
Triac, SCR Output Optoisolators Selection Notes
Select this component for AC switching applications requiring zero-crossing behavior to minimize noise. The 5300Vrms isolation rating supports high-voltage separation needs. Verify that the 60mA maximum input current aligns with the driving circuit capabilities. Consider the 6-pin DIP form factor for PCB layout constraints.
Triac, SCR Output Optoisolators Part Context
This part belongs to the MOC series of optoisolators from Isocom Components 2004 LTD. It is designed for interfacing low-voltage control circuits with high-voltage AC loads. The zero-crossing feature distinguishes it from random-phase variants in the same family.
Triac, SCR Output Optoisolators Replacement Considerations
Public confirmed substitute part numbers are not available in the provided source material.
Explore related parts through Optocouplers, Optoisolators, Isolators, all product categories, ChipApex homepage.
