MOC3062SM

Triac, SCR Output Optoisolators Overview

The MOC3062SM is a zero-crossing triac output optoisolator manufactured by Isocom Components. It features a single channel with a 5300Vrms isolation voltage rating. The device integrates an infrared emitting diode with a silicon photo-triac detector, designed for light-activated zero-voltage switching applications. Key electrical parameters include a peak repetitive off-state voltage of 600V and a typical forward voltage of 1.2V at a forward current of 50mA. The component is housed in a surface-mount package with dimensions of 7.3x6.5mm.

Triac, SCR Output Optoisolators Feature Summary

• Zero-crossing detection capability to minimize electrical noise during turn-on
• High isolation voltage rating of 5300Vrms for enhanced safety
• Integrated silicon photo-triac for direct AC load control

Triac, SCR Output Optoisolators Applications

• Solid state relay modules
• AC motor speed control circuits
• Lighting dimmer systems

Triac, SCR Output Optoisolators Procurement Notes

Verify the manufacturer designation as Isocom Components 2004 LTD or Isocom Components Limited on official datasheets. Confirm the specific suffix 'SM' indicates the surface mount variant. Ensure the part number matches the zero-crossing triac output specification rather than random-phase variants. Cross-reference the 5300Vrms isolation rating against the latest product documentation to confirm compliance with required safety standards.

Triac, SCR Output Optoisolators Selection Notes

Select this component when zero-voltage switching is required to reduce electromagnetic interference in AC power control applications. The high isolation voltage makes it suitable for mains-connected circuits. Consider the surface mount package constraints and thermal management requirements for the specific PCB layout. Verify that the 600V blocking voltage meets the peak line voltage expectations of the target application.

Triac, SCR Output Optoisolators Part Context

This device belongs to the family of zero-crossing triac output optocouplers from Isocom. These components are widely used in industrial and consumer electronics for isolating low-voltage control signals from high-voltage AC loads. The MOC3062SM specifically offers a robust solution for applications requiring reliable switching with minimal noise generation upon activation.

Triac, SCR Output Optoisolators Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material.