MOC8020G

$0.27

Description：OPTOISOLATOR 5KV 1CH DARL 6-DIP
Series：MOC8020
Mfr：Isocom Components 2004 LTD
Package：Tube

SKU:6633fa80ff0f Category: Transistor, Photovoltaic Output Optoisolators Brand: Isocom Components 2004 LTD

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC8020G is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Isocom Components 2004 LTD. Its product description is OPTOISOLATOR 5KV 1CH DARL 6-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOC8020G

Description：OPTOISOLATOR 5KV 1CH DARL 6-DIP
Series：MOC8020
Mfr：Isocom Components 2004 LTD
Package：Tube
Number of Channels：1
Voltage - Isolation：5000Vrms
Current Transfer Ratio (Min)：-
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：60µs, 53µs
Input Type：DC
Output Type：Darlington
Voltage - Output (Max)：35V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Vce Saturation (Max)：-
Operating Temperature：-25°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.400", 10.16mm)
Supplier Device Package：6-DIP
Grade：-
Qualification：-

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOC8020G

MOC8020G

Transistor, Photovoltaic Output Optoisolators Overview

The MOC8020G is a single-channel Darlington output optocoupler manufactured by Isocom Components. It integrates an infrared emitting diode with a high-gain NPN silicon phototransistor in a standard six-pin dual in-line plastic package. The device provides electrical isolation between input and output circuits, rated at a minimum of 5300 Vrms. It features a minimum current transfer ratio of 100% and supports a maximum forward current of 50 mA. The component is RoHS compliant and designed for through-hole mounting.

Transistor, Photovoltaic Output Optoisolators Feature Summary

High gain Darlington phototransistor output configuration
5300 Vrms basic isolation voltage rating
RoHS compliant plastic DIP-6 packaging

Transistor, Photovoltaic Output Optoisolators Applications

Solid-state relay driver circuits
Microprocessor system interface isolation
Logic-to-power circuit interfacing

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the manufacturer designation on the datasheet to confirm Isocom Components as the source. Ensure the ordering suffix matches the required lead frame finish or specific variant if applicable. Confirm that the component meets the necessary regional safety certifications such as UL or VDE for the intended application environment.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when high DC current switching capability is required from a low-level logic signal. The Darlington structure offers superior current transfer compared to standard phototransistors. Verify that the load current requirements fall within the collector-emitter breakdown voltage limits and thermal constraints of the DIP-6 package.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the MOC8020 series of optically coupled isolators. It shares the same internal architecture as variants like the MOC8020-G but may differ in specific regulatory approvals or lead form specifications. The series is widely used for general-purpose isolation where high sensitivity is beneficial.