MOC8100SM

$0.19

Description：OPTOISO 5.3KV 1CH DARL W/BASE
Series：MOC8100
Mfr：Isocom Components 2004 LTD
Package：Tube

SKU:6651267e630a Category: Transistor, Photovoltaic Output Optoisolators Brand: Isocom Components 2004 LTD

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC8100SM is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Isocom Components 2004 LTD. Its product description is OPTOISO 5.3KV 1CH DARL W/BASE. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOC8100SM

Description：OPTOISO 5.3KV 1CH DARL W/BASE
Series：MOC8100
Mfr：Isocom Components 2004 LTD
Package：Tube
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：-
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：2µs, 2µs
Input Type：DC
Output Type：Darlington with Base
Voltage - Output (Max)：30V
Current - Output / Channel：500µA
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：500mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：-
Grade：-
Qualification：-

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOC8100SM

MOC8100SM

Transistor, Photovoltaic Output Optoisolators Overview

The MOC8100SM is a single-channel transistor output optocoupler manufactured by Isocom Components. It features an NPN phototransistor output housed in a surface-mount SMD-DIP-6 package. Key electrical parameters include a maximum collector-emitter voltage of 30 V, a forward current of 60 mA, and a forward voltage of 1.4 V. The device provides high isolation with a rated insulation voltage of 7500 Vrms. Power dissipation is limited to 250 mW, with a maximum collector-emitter saturation voltage of 500 mV and a reverse voltage rating of 6 V.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides galvanic isolation between input and output circuits using an NPN phototransistor.

Transistor, Photovoltaic Output Optoisolators Applications

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the manufacturer source carefully, as this component is listed as discontinued by onsemi. Confirm if Isocom Components offers a direct equivalent or alternative sourcing channel. Check for RoHS compliance status and ensure the SMD-DIP-6 package dimensions match your PCB footprint requirements before finalizing procurement decisions.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when high isolation voltage is required in a compact surface-mount form factor. The NPN phototransistor output is suitable for digital signal transmission. Ensure the design accommodates the 60 mA forward current limit and verify that the 30 V collector-emitter voltage meets the load requirements.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the MOC series of optocouplers, which are widely used for electrical isolation in industrial and consumer electronics. The SM suffix typically denotes a surface-mount variant. While originally associated with onsemi, Isocom Components may supply compatible versions. These devices bridge low-voltage control circuits with higher-voltage loads safely.