MOC8100TM

$0.16

Description：OPTOISO 7.5KV TRANS W/BASE 6-DIP
Series：-
Mfr：onsemi
Package：Tube

SKU:aa8dd41cb82b Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC8100TM is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 7.5KV TRANS W/BASE 6-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOC8100TM

Description：OPTOISO 7.5KV TRANS W/BASE 6-DIP
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：1
Voltage - Isolation：7500Vpk
Current Transfer Ratio (Min)：30% @ 1mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：20µs, 20µs (Max)
Rise / Fall Time (Typ)：2µs, 2µs
Input Type：DC
Output Type：Transistor with Base
Voltage - Output (Max)：30V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：500mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.400", 10.16mm)
Supplier Device Package：6-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOC8100TM

MOC8100TM

Transistor, Photovoltaic Output Optoisolators Overview

The MOC8100TM is a single-channel transistor output optocoupler manufactured by onsemi. It features an NPN phototransistor with a base terminal for enhanced switching control and stability. The device provides high isolation capability with a rated insulation voltage of 7500 VRMS. Key electrical parameters include a maximum collector-emitter voltage (Vceo) of 30 V, a forward current (If) rating of 60 mA, and a forward voltage (Vf) of 1.4 V. The unit is housed in a 6-DIP package.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Integrated base terminal on the NPN phototransistor output for improved switching speed and noise immunity
High-voltage isolation barrier rated at 7500 VRMS for robust signal transmission across potential differences
Standard 6-pin DIP packaging suitable for through-hole mounting applications

Transistor, Photovoltaic Output Optoisolators Applications

Industrial control systems requiring galvanic isolation
Solid-state relay driver circuits
Microcontroller interface isolation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify component authenticity through authorized distribution channels. Confirm package variant matches design requirements. Check datasheet revisions for updated mechanical dimensions. Ensure storage conditions comply with moisture sensitivity levels. Validate supplier documentation against official onsemi specifications.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when base-controlled switching performance is required. Consider the 30 V collector-emitter voltage limit for load compatibility. Evaluate thermal dissipation capabilities within the system enclosure. Compare isolation voltage ratings against safety standards applicable to the target equipment.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the standard optocoupler category within onsemi's portfolio. It utilizes LED-to-phototransistor technology for electrical isolation. The product line supports various industrial and commercial isolation needs. Packaging options vary between surface mount and through-hole configurations depending on the specific suffix.