MOC8104300W

Description：OPTOISOLTR 5.3KV 1CH TRANS 6-DIP
Series：-
Mfr：onsemi
Package：Tube

SKU:fa0a107eb907 Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC8104300W is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLTR 5.3KV 1CH TRANS 6-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOC8104300W

Description：OPTOISOLTR 5.3KV 1CH TRANS 6-DIP
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：160% @ 10mA
Current Transfer Ratio (Max)：256% @ 10mA
Turn On / Turn Off Time (Typ)：2µs, 3µs
Rise / Fall Time (Typ)：1µs, 2µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：30V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.15V
Current - DC Forward (If) (Max)：100 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.400", 10.16mm)
Supplier Device Package：6-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOC8104300W

MOC8104300W

Transistor, Photovoltaic Output Optoisolators Overview

The MOC8104300W is a single-channel transistor output optocoupler manufactured by onsemi. It features an NPN phototransistor output and provides 5300Vrms isolation voltage. The device operates with a maximum forward current of 100 mA and supports a collector-emitter voltage of 30 V. Key electrical parameters include a typical rise time of 1 µs, fall time of 2 µs, and a DC forward voltage of 1.15 V. The unit is housed in a 6-DIP package and is designed for through-hole mounting.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides high-voltage electrical isolation between input and output circuits
Features fast switching speeds suitable for digital signal transmission
Utilizes an NPN phototransistor output configuration

Transistor, Photovoltaic Output Optoisolators Applications

Logic system interfaces to equipment powered from AC lines
Solid-state relay driver circuits
Computer-peripheral interface applications

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix '00W' against the manufacturer's official datasheet to confirm the 6-DIP package variant. Ensure compatibility with existing PCB footprints and isolation requirements before procurement. Cross-reference RoHS compliance status directly with onsemi documentation.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when 5300Vrms isolation is required for low-speed digital interfacing. The NPN output type suits applications requiring open-collector configurations. Verify that the 100 mA forward current limit meets the driving circuit capabilities and that the 30 V collector voltage accommodates the load requirements.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the MOC8104 series of transistor output optocouplers. It serves as a standard solution for galvanic isolation in industrial and consumer electronics. The series is widely used for connecting microcontrollers or logic gates to higher voltage AC or DC loads safely.