MOC8105300W

Description：OPTOISOLTR 5.3KV 1CH TRANS 6-DIP
Series：-
Mfr：onsemi
Package：Tube

SKU:5d726aed69e9 Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC8105300W is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLTR 5.3KV 1CH TRANS 6-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOC8105300W

Description：OPTOISOLTR 5.3KV 1CH TRANS 6-DIP
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：65% @ 10mA
Current Transfer Ratio (Max)：133% @ 10mA
Turn On / Turn Off Time (Typ)：2µs, 3µs
Rise / Fall Time (Typ)：1µs, 2µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：30V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.15V
Current - DC Forward (If) (Max)：100 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.400", 10.16mm)
Supplier Device Package：6-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOC8105300W

MOC8105300W

Transistor, Photovoltaic Output Optoisolators Overview

The MOC8105300W is a single-channel transistor output optocoupler from onsemi's FOD series, housed in a 6-pin MDIP package. It features a GaAs infrared LED coupled to an NPN phototransistor for DC input applications. Key electrical parameters include a minimum collector-emitter breakdown voltage of 30V and a typical current transfer ratio of 65%. The device offers high isolation with a rated voltage of 5300Vrms and operates within a temperature range of -40°C to 100°C.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides galvanic isolation between input and output circuits using an infrared LED and NPN phototransistor configuration.
Features a standard 6-pin MDIP through-hole package suitable for general-purpose circuit board mounting.
Designed for reliable operation in industrial environments with specified thermal and electrical ratings.

Transistor, Photovoltaic Output Optoisolators Applications

General purpose signal isolation in industrial control systems
Switching power supply feedback loops
Microcontroller interface circuits requiring electrical separation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix '300W' against official datasheets to confirm packaging type and reel specifications. Ensure compliance with RoHS directives if required by your manufacturing process. Cross-reference part numbers carefully as distributor listings may vary in accuracy regarding manufacturer origin or revision levels.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a single channel of isolation with moderate speed and high voltage rating is required. Compare the 65% CTR and 30V Vceo against system requirements. Consider the 6-pin DIP form factor for compatibility with existing PCB layouts designed for similar optocouplers.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to onsemi's broad portfolio of optoelectronic components, specifically the FOD series of optocouplers. These devices are engineered for robust performance in demanding electronic applications, leveraging onsemi's expertise in intelligent power and sensing technologies to provide reliable signal transmission across isolated boundaries.

Transistor, Photovoltaic Output Optoisolators Replacement Considerations

Direct replacements must match the 6-pin DIP package, NPN output configuration, and similar isolation voltage ratings. Verify pinout compatibility and current transfer ratio specifications before substitution to ensure circuit functionality remains intact without redesign.