MOCD208R2VM

$0.32

Description：OPTOISO 2.5KV 2CH TRANS 8-SOIC
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:2d07ff93f980 Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOCD208R2VM is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 2.5KV 2CH TRANS 8-SOIC. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOCD208R2VM

Description：OPTOISO 2.5KV 2CH TRANS 8-SOIC
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
Number of Channels：2
Voltage - Isolation：2500Vrms
Current Transfer Ratio (Min)：40% @ 10mA
Current Transfer Ratio (Max)：125% @ 10mA
Turn On / Turn Off Time (Typ)：7.5µs, 5.7µs
Rise / Fall Time (Typ)：3.2µs, 4.7µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：150mA
Voltage - Forward (Vf) (Typ)：1.25V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：400mV
Operating Temperature：-40°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOCD208R2VM

MOCD208R2VM

Transistor, Photovoltaic Output Optoisolators Overview

The MOCD208R2VM is a dual-channel transistor output optocoupler manufactured by onsemi. It features an NPN phototransistor output with a base terminal, housed in an 8-SOIC surface-mount package. The device provides 2500 Vrms isolation voltage and supports a maximum collector-emitter voltage of 70 V. Key electrical parameters include a forward current of 60 mA, a collector current of 150 mA, and a saturation voltage of 400 mV. The current transfer ratio ranges from 40% to 125%, with rise and fall times of 3.2 µs and 4.7 µs respectively.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Dual-channel configuration for independent signal isolation
NPN phototransistor output with accessible base terminal
High insulation voltage capability for safety isolation
Surface-mount packaging for automated assembly

Transistor, Photovoltaic Output Optoisolators Applications

Industrial control systems requiring galvanic isolation
Signal transmission between microcontrollers and power circuits
Solid-state relay driver interfaces
Data communication line isolation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix R2VM to confirm the reel packaging format and tape width. Ensure the component matches the 8-SOIC footprint dimensions. Confirm RoHS compliance status if required by project specifications. Check for any recent product change notices affecting assembly or material composition.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when dual-channel isolation is required within a compact surface-mount form factor. The NPN output with base access allows for improved switching speed control compared to standard configurations. Verify that the 70 V collector-emitter voltage rating meets the load requirements. Ensure the operating temperature range aligns with the application environment.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the MOCD2xxM series of dual-channel optocouplers from onsemi. It shares architectural similarities with single-channel variants but integrates two isolated channels in one package. The series is designed for general-purpose isolation applications where space efficiency and reliable signal transmission are prioritized over high-speed digital data rates.