MOCD213M

$0.80

Description：OPTOISO 2.5KV 2CH TRANS 8-SOIC
Series：-
Mfr：onsemi
Package：Tube

SKU:11c6d5facdcd Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOCD213M is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 2.5KV 2CH TRANS 8-SOIC. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOCD213M

Description：OPTOISO 2.5KV 2CH TRANS 8-SOIC
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：2
Voltage - Isolation：2500Vrms
Current Transfer Ratio (Min)：100% @ 10mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：7.5µs, 5.7µs
Rise / Fall Time (Typ)：1.6µs, 2.2µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：150mA
Voltage - Forward (Vf) (Typ)：1.25V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：400mV
Operating Temperature：-40°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
Grade：-
Qualification：-

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOCD213M

MOCD213M

Transistor, Photovoltaic Output Optoisolators Overview

The MOCD213M is a dual-channel optocoupler featuring two GaAs infrared LEDs coupled to monolithic silicon phototransistors. It provides electrical isolation with a 2500 Vrms rating and supports DC input signals. The device operates within a temperature range of -40°C to +100°C, dissipating up to 250 mW. Key electrical parameters include a maximum collector-emitter voltage of 70 V, a forward current of 60 mA, and a typical rise/fall time of 3.2 µs/4.7 µs. It utilizes an SOIC-8 surface-mount package.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Dual-channel configuration for high-density applications
Monolithic silicon phototransistor detection
Surface-mount SOIC-8 packaging

Transistor, Photovoltaic Output Optoisolators Applications

General-purpose signal isolation
Industrial control systems
Consumer electronics interfaces

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix (e.g., R2VM) against datasheet requirements to ensure correct tape-and-reel or tube packaging. Confirm RoHS compliance status and lead times with authorized distributors. Validate that the selected variant matches the required isolation voltage and thermal specifications for the target environment.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when dual-channel isolation is required in a compact form factor. Ensure the application voltage does not exceed the 70 V collector-emitter limit. Verify that the 60 mA forward current capability aligns with the driving circuit design. Consider the operating temperature range if deployed in extreme environments.

Transistor, Photovoltaic Output Optoisolators Part Context

This device belongs to the MOCD series from onsemi, designed for surface-mount technology. It replaces through-hole alternatives by offering similar isolation performance in a smaller footprint. The series focuses on providing reliable signal transmission between isolated circuits without requiring board-through mounting.