MP5061GQV-P

Hot Swap Controllers Overview

The MP5061GQV-P is a hot-swap voltage controller from Monolithic Power Systems designed for single-channel power distribution. It supports an input voltage range of 4.5 V to 28 V and features an adjustable current limit up to 15 A, with specific configurations supporting 12.5 A limits. The device integrates a low on-resistance N-channel MOSFET with an RDS(ON) of 7 mΩ. Key electrical specifications include a maximum power dissipation of 215 W and a current monitor accuracy of +/-10%. It operates within a temperature range of -40°C to +125°C and is housed in a QFN-22 package.

Hot Swap Controllers Feature Summary

• Integrates high-side protection with adjustable current limiting for safe board insertion and removal
• Provides precise current monitoring capability with specified accuracy for system diagnostics
• Features low on-resistance internal pass element to minimize conduction losses during operation

Hot Swap Controllers Applications

• Hot-swap protection for peripheral cards in industrial systems
• Power distribution units requiring controlled inrush management
• Server backplane power switching applications

Hot Swap Controllers Procurement Notes

Verify the exact current limit configuration against the specific datasheet revision, as values such as 12.5 A or 15 A may vary by suffix. Confirm the QFN-22 package dimensions and thermal pad requirements for PCB layout compatibility. Ensure the input voltage does not exceed the 28 V absolute maximum rating under all transient conditions. Check RoHS compliance documentation for environmental regulations relevant to your region.

Hot Swap Controllers Selection Notes

Select this component when designing circuits that require controlled power sequencing and overcurrent protection for high-current loads. The 7 mΩ RDS(ON) makes it suitable for applications where efficiency and thermal performance are critical. Consider the +/-10% current monitor accuracy if precise fault detection thresholds are required. Ensure the operating temperature range meets the environmental demands of the final assembly.

Hot Swap Controllers Part Context

This part belongs to the MP5061 series of hot-swap controllers from Monolithic Power Systems. These devices are categorized under PMIC and power management ICs, specifically designed for protecting power buses during live insertion events. The series offers various current ratings and package options to accommodate different power density requirements in modern electronic systems.

Hot Swap Controllers Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Verify pinout and parameter compatibility before considering any alternative components from other manufacturers.