ChipApex | Global Electronic Components Supplier
MP62160DH-LF-P
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：IC PWR SWITCH 1:1 8MSOP
- Series：-
- Mfr：Monolithic Power Systems Inc.
- Package：Tape & Reel (TR)
- Switch Type：General Purpose
- Number of Outputs：1
- Ratio - Input:Output：1:01
- Output Configuration：High Side
- Output Type：-
- Interface：On/Off
- Voltage - Load：2.7V ~ 5.5V
- Voltage - Supply (Vcc/Vdd)：Not Required
- Current - Output (Max)：2A
- Rds On (Typ)：85mOhm
- Input Type：-
- Features：Load Discharge, Status Flag
- Fault Protection：Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
- Operating Temperature：-40°C ~ 85°C (TA)
- Mounting Type：Surface Mount
- Supplier Device Package：8-MSOP-EP
- Package / Case：8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
- Grade：-
- Qualification：-
Download product information
Overview
The MP62160DH-LF-P is a single-channel power distribution switch IC from Monolithic Power Systems. It operates with an input voltage range of 2.7 V to 5.5 V and supports a continuous output current of 2 A. The device features a maximum on-resistance of 120 mOhms and includes a current limit threshold of 2.8 A. It utilizes active-low control logic and offers soft-start functionality with a maximum ramp time of 3 ms. The component is housed in an 8-lead MSOP package with an exposed pad and is rated for operation between -40°C and +85°C.
Feature Summary
- Integrates a high-side power switch with active-low enable control for simplified interface
- Provides built-in overcurrent protection with a defined current limit threshold
- Features controlled turn-on timing to minimize inrush current during startup
Applications
- Peripheral power distribution in embedded systems
- Hot-swap applications requiring controlled current ramping
- Power sequencing for low-voltage digital loads
Procurement Notes
Verify the specific suffix DH-LF-P against official MPS documentation to confirm package type and lead-free status. Confirm RoHS compliance details directly from the manufacturer datasheet. Check for obsolete status or recommended new designations as availability may vary by region.
Selection Notes
Select this component for single-channel load switching within the 2.7 V to 5.5 V supply range. Ensure the required load current does not exceed the 2 A continuous rating. Verify that the active-low control signal polarity matches the system logic levels. Consider thermal dissipation requirements based on the 120 mOhm on-resistance and ambient temperature conditions.
Part Context
This part belongs to the MP62160 series of power distribution switches. It is functionally similar to the MP62160DS-LF-Z but differs in packaging, specifically utilizing an MSOP format rather than SOIC. Both variants share identical electrical characteristics including voltage range, current ratings, and protection features.
Replacement Considerations
MP62160DS-LF-Z shares identical electrical specifications but uses an SOIC-8 package instead of MSOP-8. Verify pinout compatibility and thermal performance differences due to package variation before substitution.
