MP8314-2

RF Power Dividers/Splitters Overview

The MP8314-2 is a two-way power divider manufactured by Fairview Microwave, designed for signal conditioning applications within the 1 GHz to 4 GHz frequency range. The device features SMA connectors and is rated for an input power of up to 20 Watts. Key electrical specifications include a maximum VSWR of 1.25, minimum isolation of 18 dB, and maximum amplitude imbalance of 3 degrees. It is supplied in bag packaging.

RF Power Dividers/Splitters Feature Summary

• Provides equal power splitting for two output ports
• Operates across a wide microwave frequency band
• Supports high continuous wave power handling
• Ensures signal integrity with low voltage standing wave ratio

RF Power Dividers/Splitters Applications

• RF test and measurement setups requiring signal distribution
• Wireless communication systems operating in C-band frequencies
• Balanced amplifier configurations needing phase-coherent inputs
• Signal generation networks requiring precise power division

RF Power Dividers/Splitters Procurement Notes

Verify that the SMA connector gender and interface type match your system requirements. Confirm the operational frequency range aligns with your specific application needs between 1 GHz and 4 GHz. Ensure the 20-watt power rating exceeds your maximum expected input power to maintain performance and prevent damage. Check for any specific environmental ratings if outdoor or harsh conditions are involved.

RF Power Dividers/Splitters Selection Notes

Select this component when a two-way split is required with minimal insertion loss variation. Consider the 18 dB isolation specification for applications requiring port-to-port separation. The SMA interface dictates cable compatibility; ensure mating connectors are available. Evaluate the physical size constraints against the module form factor provided by the manufacturer.

RF Power Dividers/Splitters Part Context

This part belongs to the Fairview Microwave signal conditioning category, specifically within their RF power dividers and splitters lineup. It serves as a passive component for distributing RF energy equally. The product line focuses on maintaining signal integrity across microwave frequencies using standard connector interfaces.

RF Power Dividers/Splitters Replacement Considerations

No direct substitute part numbers are publicly confirmed in the provided documentation. When replacing, ensure the new component matches the 1-4 GHz frequency range, 20W power rating, and SMA connector interface. Verify that isolation and VSWR specifications meet or exceed the original requirements.