ChipApex | Global Electronic Components Supplier
SEARCH
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：IC MOTOR DRIVER 4V-5.5V 24TSSOP
- Series：-
- Mfr：NXP USA Inc.
- Package：Tape & Reel (TR),Cut Tape (CT)
- Motor Type - Stepper：-
- Motor Type - AC, DC：Brushed DC
- Function：Driver - Fully Integrated, Control and Power Stage
- Output Configuration：Half Bridge (2)
- Interface：Parallel
- Technology：CMOS
- Step Resolution：-
- Applications：Battery Powered
- Current - Output：1.2A
- Voltage - Supply：4V ~ 5.5V
- Voltage - Load：2V ~ 15V
- Operating Temperature：-30°C ~ 150°C (TJ)
- Mounting Type：Surface Mount
- Package / Case：24-TSSOP (0.220", 5.60mm Width)
- Supplier Device Package：24-TSSOP
- Grade：-
- Qualification：-
Download product information
Overview
The MPC17510EJR2 is a monolithic H-Bridge motor driver designed for portable electronic applications. It operates with a load supply voltage range of 2 V to 15 V and supports a maximum PWM control frequency of 200 kHz. The device features low ON-resistance, typically 0.45 Ohm, and delivers an output current of 1 A DC with peak capability up to 3 A. It integrates a charge pump, level shifter, shoot-through protection, and undervoltage detection.
Feature Summary
- Monolithic H-Bridge architecture for controlling small brushed DC motors
- Integrated charge pump and level shifter for gate drive voltages
- Parallel MCU interface supporting forward, reverse, brake, and tri-state modes
- Built-in shoot-through current protection and undervoltage circuit detector
Applications
- Digital still cameras
- Single lens reflex (SLR) cameras
- Portable electronic devices requiring motor control
Procurement Notes
Verify component authenticity through authorized NXP channels due to discontinuation status. Confirm package integrity and pin alignment against the TSSOP-EP specification. Review historical datasheet revisions for any functional updates prior to integration into legacy systems.
Selection Notes
Select this component for low-voltage portable applications requiring compact H-Bridge solutions. Ensure logic voltage compatibility with the 5.0 V requirement. Evaluate thermal management needs given the 1 A continuous current rating and typical on-resistance characteristics in the target enclosure.
Part Context
This part belongs to the MPC17510 family of H-Bridge drivers from NXP Semiconductors. It serves as a specialized power management IC within the Motor / Motion / Ignition Controllers & Drivers category, tailored for integrating motor control functions into space-constrained consumer electronics.
Replacement Considerations
The MPC17510 series is listed as no longer manufactured. Verify availability of direct substitutes or evaluate redesign requirements using currently active NXP motor driver portfolios that maintain similar voltage and current specifications.
