MPQ18811-10FGY-AEC1-P

$2.97

Description：ISOLATED, SINGLE-CHANNEL GATE DR
Series：-
Mfr：Monolithic Power Systems Inc.
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:55209b6d0a8e Category: Isolators - Gate Drivers Brand: Monolithic Power Systems Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MPQ18811-10FGY-AEC1-P is listed in the Isolators - Gate Drivers range at ChipApex. The manufacturer field lists Monolithic Power Systems Inc.. Its product description is ISOLATED, SINGLE-CHANNEL GATE DR. Review the specifications below when checking this part for your BOM.

Isolators - Gate Drivers specifications for MPQ18811-10FGY-AEC1-P

Description：ISOLATED, SINGLE-CHANNEL GATE DR
Series：-
Mfr：Monolithic Power Systems Inc.
Package：Tape & Reel (TR),Cut Tape (CT)
Technology：Capacitive Coupling
Number of Channels：1
Voltage - Isolation：5000Vrms
Propagation Delay tpLH / tpHL (Max)：65ns, 65ns
Pulse Width Distortion (Max)：7ns
Rise / Fall Time (Typ)：42ns, 32ns
Current - Output High, Low：3A, 5A
Current - Peak Output：10A
Voltage - Forward (Vf) (Typ)：-
Voltage - Output Supply：17.5V ~ 30V
Grade：Automotive
Qualification：AEC-Q100
Operating Temperature：-40°C ~ 150°C
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.295", 7.50mm Width)
Supplier Device Package：8-SOIC
Common Mode Transient Immunity (Min)：150kV/µs
Approval Agency：CQC, CSA, IEC/EN/DIN, UR
Current - DC Forward (If) (Max)：-

Isolators - Gate Drivers datasheet and documents for MPQ18811-10FGY-AEC1-P

MPQ18811-10FGY-AEC1-P

Isolators - Gate Drivers Overview

The MPQ18811-10FGY-AEC1-P is an isolated, single-channel gate driver from Monolithic Power Systems. It utilizes capacitive coupling technology for signal transmission and provides a peak source current of 6A and a peak sink current of 10A. The device operates within a supply voltage range of 2.8V to 5.5V and features both inverting and non-inverting output configurations. It is housed in an 8-SOIC package and supports a rise time of 55ns. This component holds AEC-Q100 qualification for automotive reliability.

Isolators - Gate Drivers Feature Summary

Capacitive coupling isolation technology
High peak sink current capacity
Automotive grade qualification

Isolators - Gate Drivers Applications

Automotive power electronics
Half-bridge driver circuits
Isolated gate drive applications

Isolators - Gate Drivers Procurement Notes

Verify the specific suffix 'FGY' against official datasheets to confirm pinout and isolation ratings. Ensure the ordering code matches the exact package variant required for your PCB layout. Confirm AEC-Q100 compliance requirements with your system specifications before finalizing procurement decisions.

Isolators - Gate Drivers Selection Notes

Select this component when high-speed isolated driving is required for automotive environments. The 10A sink capability suits low-impedance loads. Verify that the 5.5V maximum supply voltage aligns with your control logic levels. Consider the SOIC-8 footprint constraints during the initial design phase.

Isolators - Gate Drivers Part Context

This part belongs to the MPQ18811 series of isolated gate drivers designed by Monolithic Power Systems. The series focuses on providing robust isolation for power switching applications. The MPQ18811-10FGY-AEC1-P represents a specific configuration within this family tailored for automotive standards.