MYC-JX8MMA7-8E2D-32Q256D-160-I

Microcontrollers, Microprocessor, FPGA Modules Overview

The MYC-JX8MMA7-8E2D-32Q256D-160-I is a System-on-Module by MYIR Tech Limited featuring an ARM+FPGA architecture. It integrates an NXP i.MX 8M Mini processor with up to 1.8GHz Quad-core Cortex-A53 and 400MHz Cortex-M4 cores, alongside a Xilinx XC7A25T Artix-7 FPGA. Memory includes 2GB LPDDR4, 8GB eMMC, and 32MB QSPI Flash for the ARM side, plus 256MB DDR3 and 32MB QSPI Flash for the FPGA. The module utilizes two ROHM BD71847AMWV PMICs and connects via a 314-pin MXM 3.0 connector. It supports Linux OS and operates within a commercial temperature range of 0°C to 70°C.

Microcontrollers, Microprocessor, FPGA Modules Feature Summary

• Dual-processor architecture combining NXP i.MX 8M Mini (up to 1.8GHz) and Xilinx Artix-7 XC7A25T FPGA
• Comprehensive memory configuration: 2GB LPDDR4, 8GB eMMC, 32MB QSPI Flash for ARM; 256MB DDR3, 32MB QSPI Flash for FPGA
• Standardized 314-pin MXM 3.0 gold-finger-edge-card connector for easy integration
• Linux software support with source code availability for bootloader, kernel, and drivers

Microcontrollers, Microprocessor, FPGA Modules Applications

• Medical devices requiring high-definition display and data acquisition
• Industrial data acquisition systems with high-speed processing needs
• Power industry monitoring and control applications
• Communication equipment utilizing embedded processing capabilities

Microcontrollers, Microprocessor, FPGA Modules Procurement Notes

Verify the specific ordering suffix '-160-I' corresponds to the commercial temperature grade (0°C to 70°C) as indicated in the documentation. Confirm that the package includes only the System-On-Module unless explicitly purchasing the development board kit. Ensure compatibility with baseboards supporting the 314-pin MXM 3.0 interface before procurement.

Microcontrollers, Microprocessor, FPGA Modules Selection Notes

Select this module when both high-performance multimedia processing and flexible hardware acceleration are required. The inclusion of dedicated memory for the FPGA allows independent operation from the ARM core. Consider the industrial-grade variant if operating temperatures below 0°C or above 70°C are anticipated, as the current part number specifies commercial limits.

Microcontrollers, Microprocessor, FPGA Modules Part Context

This module belongs to the MYC-JX8MMA7 series, designed to address scenarios where traditional ARM processors lack sufficient parallel processing power. It pairs with the MYD-JX8MMA7 development board for evaluation. The design leverages the cost-effective Artix-7 FPGA to offload high-speed data tasks from the Cortex-A53 cores.

Microcontrollers, Microprocessor, FPGA Modules Replacement Considerations

No direct public substitute part numbers are documented. Alternative solutions would require evaluating other ARM+FPGA modules with similar MXM form factors and comparable memory configurations, ensuring pinout compatibility with existing carrier boards.