N08SP004M

Inrush Current Limiters (ICL) Overview

The YAGEO N08SP004M is an NTC thermistor from the SP series, designed for PCB mounting with radial termination. It features a nominal resistance of 4 Ohms and a power rating of 2 W. The component has a current rating of 3 A and a tolerance of 20%. Physical dimensions include an 11 mm diameter and 6 mm width, with a lead spacing of 5 mm. It operates within a temperature range of -40 C to +170 C.

Inrush Current Limiters (ICL) Feature Summary

• Effectively restrains electrical surges in circuits
• Maintains low power loss during stable operating states
• Provides wide over-current control range with fast response times

Inrush Current Limiters (ICL) Applications

• Surge protection in electronic circuits
• Inrush current limiting applications
• Over-current protection systems

Inrush Current Limiters (ICL) Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels. Confirm RoHS compliance status and specific datasheet revisions prior to integration. Ensure storage conditions align with manufacturer guidelines to maintain thermal characteristics and prevent degradation of the NTC material properties.

Inrush Current Limiters (ICL) Selection Notes

Select this component based on its 4 Ohm resistance and 3 A current handling capability. Evaluate the 2 W power rating against circuit load requirements. Consider the 11 mm diameter and radial leads for PCB layout constraints. Verify that the -40 C to +170 C operating range meets environmental demands.

Inrush Current Limiters (ICL) Part Context

This part belongs to the YAGEO SP series of NTC thermistors. These components are engineered for surge suppression and inrush current control. The series offers various resistance values and physical sizes to accommodate different circuit protection needs while maintaining consistent performance characteristics.

Inrush Current Limiters (ICL) Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Cross-referencing requires matching resistance, current rating, and physical dimensions.