N20SP006M

Inrush Current Limiters (ICL) Overview

The YAGEO N20SP006M is a Negative Temperature Coefficient (NTC) thermistor designed for inrush current limiting applications. It features a nominal resistance of 6 Ohms and a continuous current rating of 6 Amperes. The component has a maximum power rating of 4 Watts and operates within a temperature range of -40°C to +170°C. It utilizes a radial leaded PCB mount configuration with a 7.5 mm lead spacing. The unit measures 24 mm in diameter and 7.5 mm in width, packaged in bulk quantities.

Inrush Current Limiters (ICL) Feature Summary

• Provides effective inrush current suppression during power-up sequences
• Features rapid thermal response due to low thermal mass design
• Supports high continuous current loads up to 6 Amperes
• Ensures reliable operation across extended industrial temperature ranges

Inrush Current Limiters (ICL) Applications

• Inrush current limiting in AC/DC power supplies
• Protection circuits for motor drives and transformers
• Surge protection in consumer electronic devices
• Input stage filtering for industrial control systems

Inrush Current Limiters (ICL) Procurement Notes

Verify the specific datasheet version and RoHS compliance status directly with YAGEO or authorized distributors before procurement. Confirm that the radial lead spacing matches the target PCB footprint requirements. Ensure the operating environment does not exceed the specified maximum junction temperature limits during peak load conditions.

Inrush Current Limiters (ICL) Selection Notes

Select this component when a 6 Ohm initial resistance is required to limit surge currents in 6 Ampere circuits. Consider the 24 mm diameter for adequate heat dissipation capabilities. Evaluate the thermal time constant against the system's startup duration to ensure sufficient protection without excessive steady-state voltage drop.

Inrush Current Limiters (ICL) Part Context

This part belongs to the SP series of NTC thermistors from YAGEO. It is functionally similar to the N20SP007 but offers lower resistance for higher current applications. It serves as a passive protective element in power electronics, distinct from active switching components.

Inrush Current Limiters (ICL) Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. Verify compatibility with alternative NTC thermistors based on matching resistance, current rating, and physical dimensions.