N74F3037N,602

Description：IC GATE NAND 4CH 2-INP 16DIP
Series：74F
Mfr：NXP USA Inc.
Package：Tube

SKU:e1fcb6de7fef Category: Gates and Inverters Brand: NXP USA Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

N74F3037N,602 is listed in the Inverter Gates range at ChipApex. The manufacturer field lists NXP USA Inc.. Its product description is IC GATE NAND 4CH 2-INP 16DIP. Review the specifications below when checking this part for your BOM.

Inverter Gates specifications for N74F3037N,602

Description：IC GATE NAND 4CH 2-INP 16DIP
Series：74F
Mfr：NXP USA Inc.
Package：Tube
Logic Type：NAND Gate
Number of Circuits：4
Number of Inputs：2
Features：-
Voltage - Supply：4.5V ~ 5.5V
Current - Quiescent (Max)：-
Current - Output High, Low：67mA, 160mA
Input Logic Level - Low：0.8V
Input Logic Level - High：2.4V
Max Propagation Delay @ V, Max CL：5ns @ 5V, 50pF
Operating Temperature：0°C ~ 70°C
Mounting Type：Through Hole
Supplier Device Package：16-DIP
Package / Case：16-DIP (0.300", 7.62mm)
Grade：-
Qualification：-

Inverter Gates datasheet and documents for N74F3037N,602

N74F3037N,602

Inverter Gates Overview

The N74F3037N,602 is a high-current line driver composed of four independent 2-input NAND gates. Designed to manage transmission line effects on printed circuit boards during fast edge rate operations, it facilitates incident wave switching. The device provides a source drive capability of 67mA and a sink drive capability of 160mA at VCC as low as 4.5V. It ensures incident wave switching with VOH not less than 2.0V and VOL not more than 0.8V while driving impedances as low as 30 ohms.

Inverter Gates Feature Summary

High current output drive capability for managing transmission line effects
Designed specifically for incident wave switching applications
Capable of driving low impedance loads down to 30 ohms

Inverter Gates Applications

Transmission line termination on PC boards
Incident wave switching circuits
Fast edge rate signal driving

Inverter Gates Procurement Notes

Verify the specific suffix '602' against official manufacturer documentation to confirm exact commercial packaging or environmental compliance status. Confirm availability as this component may be subject to discontinuation notices. Ensure the required operating temperature range matches your design specifications before procurement.

Inverter Gates Selection Notes

Select this component when standard logic drivers cannot handle low-impedance transmission lines. It is suitable for designs requiring high-speed incident wave switching. Verify that the 30-ohm load requirement aligns with your PCB trace impedance. Consider the industrial temperature range variant if operation below 0°C is necessary.

Inverter Gates Part Context

This part belongs to the 74F series of high-speed TTL logic devices manufactured by Philips/NXP Semiconductors. It is functionally equivalent to the generic 74F3037 type number. The 'N' designation indicates a 16-pin plastic dual in-line package (DIP). The device is intended for commercial temperature ranges unless specified otherwise.