NC7S32M5

Inverter Gates Overview

The NC7S32M5 is a single-channel, high-performance CMOS OR gate belonging to the TinyLogic HS series. It operates within a supply voltage range of 2.0 V to 6.0 V and supports an operating temperature range from -40°C to +85°C. The device features balanced propagation delays with typical values of 3.5 ns at 5.0 V and maximums up to 125 ns depending on load conditions. Quiescent current is less than 1 µA, while output drive capabilities include a low-level sink current of 2.6 mA and a high-level source current of -2.6 mA.

Inverter Gates Feature Summary

• Advanced silicon gate CMOS fabrication ensures high-speed operation and low power consumption across a broad voltage range.
• Integrated ESD protection diodes guard both inputs and outputs against static discharge relative to VCC and GND rails.
• Three stages of gain between inputs and outputs provide high noise immunity and reduced sensitivity to input edge rates.

Inverter Gates Applications

• Signal routing in portable consumer electronics
• Logic level translation in battery-powered devices
• General-purpose logic functions in space-constrained PCB designs

Inverter Gates Procurement Notes

Verify the specific package variant required for your design, as the NC7S32 family includes SOT-23 (M5X), SC-70 (P5X), and MicroPak (L6X) options. Confirm that the ordering suffix matches the physical footprint and lead configuration needed for your assembly process. Ensure unused inputs are tied to a defined logic state during implementation to prevent floating nodes.

Inverter Gates Selection Notes

Select this component when a compact, single-gate OR function is required with minimal quiescent power draw. The wide 2V to 6V operating range makes it suitable for various digital logic families. Consider the specific package dimensions if board real estate is limited, noting that the SC-70 offers a lower profile compared to the standard SOT-23.

Inverter Gates Part Context

This part belongs to the TinyLogic HS series, designed for high-speed applications requiring small form factors. It complements other logic gates like inverters and NANDs within the same family, allowing designers to mix and match functions while maintaining consistent electrical characteristics and packaging standards across a system.

Inverter Gates Replacement Considerations

Direct substitutes include NC7S32P5X (SC-70 package) and NC7S32L6X (MicroPak package). Verify pinout compatibility and thermal resistance differences when switching between SOT-23, SC-70, and MicroPak packages to ensure adequate heat dissipation for your application.

Inverter Gates FAQ

What is the recommended handling for unused inputs?

Unused inputs must be held HIGH or LOW and may not float to ensure reliable operation and prevent excessive current consumption.

How does the device handle input edge rates?

The three-stage gain design reduces sensitivity to input edge rates, providing high noise immunity even with slower signal transitions.