NCV500SN33T1G

$0.88

Description：IC REG LINEAR 3.3V 150MA 5-TSOP
Series：-
Mfr：onsemi
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:25a1d1ddc8fd Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

NCV500SN33T1G is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists onsemi. Its product description is IC REG LINEAR 3.3V 150MA 5-TSOP. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for NCV500SN33T1G

Description：IC REG LINEAR 3.3V 150MA 5-TSOP
Series：-
Mfr：onsemi
Package：Tape & Reel (TR),Cut Tape (CT)
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：1
Voltage - Input (Max)：6V
Voltage - Output (Min/Fixed)：3.3V
Voltage - Output (Max)：-
Voltage Dropout (Max)：0.23V @ 150mA
Current - Output：150mA
Current - Quiescent (Iq)：1 µA
Current - Supply (Max)：300 µA
PSRR：62dB (1kHz)
Control Features：Enable
Protection Features：Over Current, Over Temperature
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：SOT-23-5 Thin, TSOT-23-5
Supplier Device Package：5-TSOP
Grade：Automotive
Qualification：AEC-Q100

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for NCV500SN33T1G

NCV500SN33T1G

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The NCV500SN33T1G is a fixed-output low dropout linear regulator from the NCP500 series, manufactured by onsemi. It provides a nominal output voltage of 3.3 V with a maximum continuous output current of 150 mA. The device operates within an input voltage range of 1.8 V to 6.0 V and features an ultra-low dropout voltage of 170 mV at full load. It includes an enable pin compatible with 1.0 V logic levels and offers high accuracy with a 2.5% output voltage tolerance. The component is housed in a TSOP-5 surface-mount package and is designed for portable battery-powered applications requiring low noise operation.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

CMOS architecture delivers low noise performance without requiring external bypass capacitors
Integrated PMOS power transistor enables fast enable turn-on response time
Includes internal current limit and thermal shutdown protection circuits
AEC-Q100 qualified with unique site and control change requirements for automotive use

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Noise sensitive circuits such as VCOs and RF stages
Post-regulation for Switching Mode Power Supplies (SMPS)
Hand-held instrumentation devices
Camcorders and digital cameras

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify that the specific part number matches the required automotive qualification standards associated with the NCV prefix. Confirm the package type is TSOP-5 as specified. Ensure the ordering suffix corresponds to the correct reel or cut tape configuration. Cross-reference the manufacturer's latest datasheet revision to confirm active status and any potential obsolescence notices before finalizing procurement.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this component when a low-noise, fixed 3.3 V supply is needed for portable electronics. It is suitable for designs requiring direct drive from 1.0 V logic via the enable pin. Consider the 150 mA current limit and 6.0 V maximum input voltage constraints. The TSOP-5 package is appropriate for space-constrained surface-mount assemblies. Verify compatibility with ceramic output capacitors for stability.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This device belongs to the NCP500 series of low dropout regulators. The NCV prefix indicates it meets specific automotive quality and manufacturing site control requirements, distinguishing it from the standard NCP variants. It shares architectural similarities with other low-noise LDOs but is optimized for battery-powered portability and fast transient response.