NF15AA0809M--

Description：ICL 8 OHM 20% 4.2A 15MM
Series：NF15
Mfr：KYOCERA AVX
Package：Bulk

SKU:b92b4e18a396 Category: Inrush Current Limiters (ICL) Brand: KYOCERA AVX

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

NF15AA0809M– is listed in the Inrush Current Limiters (ICL) range at ChipApex. The manufacturer field lists KYOCERA AVX. Its product description is ICL 8 OHM 20% 4.2A 15MM. Review the specifications below when checking this part for your BOM.

Inrush Current Limiters (ICL) specifications for NF15AA0809M–

Description：ICL 8 OHM 20% 4.2A 15MM
Series：NF15
Mfr：KYOCERA AVX
Package：Bulk
R @ 25°C：8 Ohms
Tolerance：±20%
Current - Steady State Max：4.2 A
R @ Current：240 mOhms
Diameter：0.591" (15.00mm)
Lead Spacing：0.300" (7.62mm)
Grade：-
Qualification：-
Approval Agency：-

Inrush Current Limiters (ICL) datasheet and documents for NF15AA0809M–

NF15AA0809M--

Inrush Current Limiters (ICL) Overview

The NF15AA0809M-- is an inrush current limiter (ICL) manufactured by KYOCERA AVX. It features a nominal resistance of 8 Ohms at 25°C with a tolerance of ±20%. The device supports a maximum steady-state current of 4.2 A and has a diameter of 15 mm (0.591 inches). Lead spacing is specified at 7.62 mm (0.300 inches). The component operates within a standard temperature range and utilizes a radial leaded package configuration for circuit board mounting.

Inrush Current Limiters (ICL) Feature Summary

Provides effective inrush current limiting to protect downstream components during power-up
Features self-resetting positive temperature coefficient behavior for repeated cycle operation
Designed with robust construction to withstand high initial surge currents without damage

Inrush Current Limiters (ICL) Applications

Power supply input stages for surge protection
Industrial equipment power circuits
Consumer electronics power management

Inrush Current Limiters (ICL) Procurement Notes

Verify the specific electrical requirements against the official datasheet before procurement. Confirm that the 8 Ohm resistance and 4.2 A current rating align with the target circuit design. Ensure compatibility with the 15 mm diameter and lead spacing dimensions for the intended PCB layout. Check for any updated environmental compliance declarations or RoHS status directly from the manufacturer documentation prior to ordering.

Inrush Current Limiters (ICL) Selection Notes

Select this component when a fixed resistance value of 8 Ohms is required for inrush control. The 4.2 A steady-state current capacity must exceed the operational load current. Consider the physical footprint constraints due to the 15 mm diameter. Evaluate thermal dissipation capabilities under continuous load conditions to ensure reliable long-term performance in the application environment.

Inrush Current Limiters (ICL) Part Context

This part belongs to the NF series of inrush current limiters produced by KYOCERA AVX. These devices are thermistors designed to limit the initial charging current of capacitive loads. The series offers various resistance values and current ratings to suit different power levels, providing a cost-effective solution for protecting sensitive electronic components from high startup currents.