NFZ5BBW610LN10L

Overview

The NFZ5BBW610LN10L is a single-channel chip noise filter from Murata's EMIFIL NFZ series. It features a 2020 (5050 metric) surface-mount package with dimensions of 5.0 mm length, 5.0 mm width, and 2.0 mm height. The component exhibits an impedance of 61 Ohms at a test frequency of 1 MHz with a tolerance of 30%. It supports a maximum DC current of 1.6 A and has a maximum DC resistance of 106 mOhms to 127 mOhms. The device operates within a temperature range of -40°C to +125°C.

Feature Summary

• Provides electromagnetic interference suppression through high-impedance characteristics at specific frequencies.
• Designed for surface-mount technology integration into compact electronic circuits.
• Constructed to withstand operating temperatures ranging from -40°C to +125°C.

Applications

• General EMI noise suppression in electronic devices
• Signal line filtering in consumer electronics
• Power line noise reduction in portable equipment

Procurement Notes

Verify the exact datasheet version and impedance tolerance specifications prior to procurement, as manufacturing updates may occur. Confirm that the 2020 package footprint matches the target PCB design constraints. Ensure compliance with RoHS3 standards if required by the end-product regulations. Cross-reference the maximum DC current rating against the actual circuit load to prevent thermal issues during operation.

Selection Notes

Select this component when a low-profile 2020 package is required for space-constrained designs. Choose based on the 61 Ohm impedance requirement at 1 MHz for the target noise spectrum. Ensure the 1.6 A current rating exceeds the maximum expected DC bias in the application. Consider the 127 mOhm maximum DC resistance impact on voltage drop if used in power delivery paths.

Part Context

This part belongs to the Murata NFZ5BBW series of ferrite beads, specifically designed for EMI suppression. The '610' designation indicates the impedance value, while 'LN10L' specifies the packaging and tape configuration. It is a passive component used to attenuate high-frequency noise without affecting the desired signal bandwidth significantly.

Replacement Considerations

Direct substitutes must match the 2020 package size, 61 Ohm impedance at 1 MHz, and 1.6 A current rating. Verify that alternative components maintain similar DC resistance and temperature coefficients to ensure equivalent performance in the existing circuit layout.

FAQ

What is the impedance tolerance for the NFZ5BBW610LN10L?

The impedance tolerance is specified as 30%.

Does this component support surface-mount assembly?

Yes, it is designed for SMD/SMT installation in a 2020 package.