NJU7016M

$0.59

Description：IC CMOS 2 CIRCUIT 8DMP
Series：-
Mfr：Nisshinbo Micro Devices Inc.
Package：Tube

SKU:f55ac6fcc5ae Category: Instrumentation, Op Amps, Buffer Amps Brand: Nisshinbo Micro Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

NJU7016M is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Nisshinbo Micro Devices Inc.. Its product description is IC CMOS 2 CIRCUIT 8DMP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for NJU7016M

Description：IC CMOS 2 CIRCUIT 8DMP
Series：-
Mfr：Nisshinbo Micro Devices Inc.
Package：Tube
Amplifier Type：CMOS
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：2.4V/µs
Gain Bandwidth Product：1 MHz
Current - Input Bias：1 pA
Voltage - Input Offset：10 mV
Current - Supply：200µA
Current - Output / Channel：-
Voltage - Supply Span (Min)：1 V
Voltage - Supply Span (Max)：5.5 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.197", 5.00mm Width)
Supplier Device Package：8-DMP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for NJU7016M

NJU7016M

Instrumentation, Op Amps, Buffer Amps Overview

The NJU7016M is a dual C-MOS operational amplifier featuring a wide operating voltage range of 1V to 5.5V and low power consumption with a typical operating current of 200μA per circuit. It provides a unity gain bandwidth of 1MHz, a slew rate of 2.4V/μs, and an input bias current of 1pA. The device supports ground sensing inputs and rail-to-rail output swing, housed in a DMP8 surface-mount package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Single supply operation with wide voltage tolerance
Low power consumption suitable for portable devices
Ground sensing capability with rail-to-rail output

Instrumentation, Op Amps, Buffer Amps Applications

Portable electronic devices
Battery-powered instrumentation
Signal conditioning circuits

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific package variant (DMP8) against the required footprint. Confirm that the operating current and bandwidth specifications align with the design requirements. Ensure compatibility with single-supply configurations and check thermal dissipation limits for the selected package type during procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when a balance between low power consumption and moderate speed is required. The NJU7016M offers higher performance than the NJU7014 and NJU7015 variants while maintaining CMOS efficiency. Consider the DMP8 package for compact surface-mount designs requiring dual amplification channels.

Instrumentation, Op Amps, Buffer Amps Part Context

Part of the NJU7014/15/16 series of low-power dual C-MOS operational amplifiers. The series differentiates models by operating current and slew rate, with the NJU7016 providing a typical current of 200μA and a slew rate of 2.4V/μs. All variants share similar electrical characteristics regarding input offset voltage and common-mode rejection ratio.