NJU7095D

Description：IC CMOS 2 CIRCUIT 8DIP
Series：-
Mfr：Nisshinbo Micro Devices Inc.
Package：Tube

SKU:f6377d5163d9 Category: Instrumentation, Op Amps, Buffer Amps Brand: Nisshinbo Micro Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

NJU7095D is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Nisshinbo Micro Devices Inc.. Its product description is IC CMOS 2 CIRCUIT 8DIP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for NJU7095D

Description：IC CMOS 2 CIRCUIT 8DIP
Series：-
Mfr：Nisshinbo Micro Devices Inc.
Package：Tube
Amplifier Type：CMOS
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：1V/µs
Gain Bandwidth Product：1 MHz
Current - Input Bias：1 pA
Voltage - Input Offset：2 mV
Current - Supply：80µA
Current - Output / Channel：-
Voltage - Supply Span (Min)：1 V
Voltage - Supply Span (Max)：5.5 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-DIP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for NJU7095D

NJU7095D

Instrumentation, Op Amps, Buffer Amps Overview

The NJU7095D is a dual C-MOS operational amplifier featuring single-supply operation with a wide voltage range of 1V to 5.5V. It provides a typical operating current of 80µA per circuit, a maximum input offset voltage of 4mV, and a typical input bias current of 1pA. The device offers a slew rate of 1.0V/µs and a unity gain bandwidth of 1.0MHz. It supports ground sensing input and rail-to-rail output swing, housed in an 8-lead DIP package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Single power supply operation from 1V to 5.5V
Low offset voltage of 4mV maximum
Ground sensing input capability
Rail-to-rail output swing

Instrumentation, Op Amps, Buffer Amps Applications

Portable devices
Battery-powered equipment
Sensor signal conditioning

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific package suffix 'D' corresponds to the DIP8 outline as documented in the official datasheet. Confirm that the ordering code matches the manufacturer's standard designation for this component variant. Ensure compatibility with the required thermal and electrical specifications for the intended application environment before finalizing procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select the NJU7095D when a balance between low power consumption and moderate speed is required. It is suitable for applications needing higher slew rates than the NJU7094 but lower power than the NJU7096. Consider the DIP8 package for through-hole mounting requirements or prototyping needs where surface-mount options are not preferred.

Instrumentation, Op Amps, Buffer Amps Part Context

The NJU7095D belongs to the NJU7094/95/96 family of low-voltage dual C-MOS operational amplifiers manufactured by Nisshinbo Micro Devices Inc. This series is designed for portable applications requiring low power and high precision. The NJU7095 variant specifically targets mid-range performance between the ultra-low power NJU7094 and the higher-speed NJU7096.