— IC芯片 | 连接器 | 传感器 | 被动器件 —
Product Detailed Parameters
- Description:NPS1000UP/SOT8068/WLCSP8
- Series:-
- Mfr:Nexperia USA Inc.
- Package:Tape & Reel (TR),Cut Tape (CT)
- Switch Type:General Purpose
- Number of Outputs:1
- Ratio - Input:Output:1:01
- Output Configuration:High Side
- Output Type:N-Channel
- Interface:On/Off
- Voltage - Load:0.5V ~ 1V
- Voltage - Supply (Vcc/Vdd):2.3V ~ 5V
- Current - Output (Max):1.5A
- Rds On (Typ):11mOhm
- Input Type:Non-Inverting
- Features:Load Discharge, Slew Rate Controlled
- Fault Protection:Over Temperature, UVLO
- Operating Temperature:-40°C ~ 105°C (TJ)
- Mounting Type:Surface Mount
- Supplier Device Package:8-WLCSP (1.42x0.72)
- Package / Case:8-XFBGA, WLCSP
- Grade:-
- Qualification:-
Download product information
Overview
The NPS1000UPZ is a low-voltage, single-channel load switch from Nexperia designed for power distribution applications. It features a typical on-resistance of 11mΩ at 25°C to minimize voltage drop and power loss. The device supports an operating voltage range of 0.5V to 1.0V and handles up to 0.6A RMS current with a 1.5A peak capability. It includes controlled turn-on time, short-circuit tolerance up to 4.5A, and thermal shutdown protection. The component operates within a junction temperature range of -40°C to +105°C and is housed in a WLCSP-8 package.
Feature Summary
- Low on-resistance reduces IR voltage drop and power dissipation
- Controlled surge current charging for output capacitors during enable
- Internal discharge resistor prevents floating outputs when disabled
- Thermal shutdown with latch-off and input UVLO protection
Applications
- Mobile phones
- Wearable devices
- IoT modules
Procurement Notes
Verify the specific suffix UPZ corresponds to the WLCSP-8 packaging configuration as documented in official Nexperia datasheets. Confirm RoHS compliance status through the manufacturer's latest documentation. Ensure design compatibility with the specified 0.5V to 1.0V supply range and logic level requirements before integration.
Selection Notes
Select this component for space-constrained designs requiring efficient power management in low-voltage systems. The WLCSP-8 package offers a small footprint suitable for dense PCB layouts. Consider the 11mΩ on-resistance for applications prioritizing minimal power loss. Verify that the 1.5A peak current rating meets the transient load requirements of the target circuit.
Part Context
This part belongs to the Nexperia NPS100x series of load switches. The series is characterized by low voltage operation and compact packaging. These components are engineered for portable electronics where power efficiency and board space are critical constraints. The NPS1000 variant specifically targets single-channel power switching needs.
Replacement Considerations
NPS1001UPZ is a confirmed substitute within the same product family offering similar functionality.
ChipApex | Global Electronic Components Supplier








