NSVBC123JPDXV6T1G

Overview

The NSVBC123JPDXV6T1G is a digital transistor from onsemi, featuring a complementary dual configuration with one NPN and one PNP transistor. It is housed in an SOT-563-6 surface-mount package. The device supports a maximum collector-emitter voltage (VCEO) of 50 V and a continuous DC collector current of 100 mA. Typical input resistance is specified at 47 kOhms with a resistor ratio of 1. The unit offers a minimum DC current gain (hFE) of 100 for the NPN and 80 for the PNP channel. Power dissipation is rated at 357 mW, with an operating temperature range spanning from -55°C to +150°C.

Feature Summary

• Integrates complementary NPN and PNP transistors into a single compact component to reduce circuit board space.
• Includes built-in internal biasing resistors to simplify driver interface requirements and minimize external component count.
• Designed for high reliability with AEC-Q101 qualification suitable for automotive applications.

Applications

• Automotive infotainment system logic interfaces
• General-purpose switching circuits in vehicle electronics
• Driver stage replacement for discrete resistor networks

Procurement Notes

Verify the complete part number including the suffix against official manufacturer documentation before ordering. Confirm that the specific revision matches project requirements. Check for RoHS compliance status as indicated in the latest datasheet. Ensure storage conditions adhere to moisture sensitivity level specifications. Validate pinout compatibility with existing PCB footprints during the design phase.

Selection Notes

Select this component when a complementary pair of pre-biased transistors is required in a small outline package. Compare the 47 kOhm input resistance against other variants in the series if different drive currents are needed. Ensure the 50 V voltage rating exceeds the maximum circuit load. Verify that the SOT-563 footprint aligns with the assembly capabilities and design constraints.

Part Context

This part belongs to the NSVBC123 series of digital transistors manufactured by onsemi. It is specifically designed for automotive environments, meeting AEC-Q101 standards. The J suffix typically denotes a specific tape and reel packaging configuration or variant within the broader NSBC family. It serves as a direct replacement for discrete resistor-transistor networks in signal switching applications.

Replacement Considerations

Direct substitutes include NSBC123JPDXV6T1G. Cross-reference electrical parameters such as VCEO, IC, and R1 values carefully. Verify package pinout compatibility to ensure no redesign is necessary. Check for updated lifecycle status to avoid obsolescence risks.