NTB01-010MV

Inrush Current Limiters (ICL) Overview

The NTB01-010MV is an inrush current limiter (ICL) manufactured by YAGEO. It features a nominal resistance of 10 Ohms with a tolerance of ±20%. The component supports a maximum steady-state current of 1 A and has a lead spacing of 7.50 mm (0.295 inches). It operates within a temperature range of -40°C to +85°C.

Inrush Current Limiters (ICL) Feature Summary

• Provides effective inrush current limiting for electronic circuits
• Utilizes negative temperature coefficient thermistor technology
• Designed for radial leaded PCB mounting applications

Inrush Current Limiters (ICL) Applications

• Power supply input stages
• Consumer electronics protection
• Industrial equipment circuitry

Inrush Current Limiters (ICL) Procurement Notes

Verify the specific datasheet version and RoHS compliance status prior to procurement, as product lifecycle stages may vary. Confirm that the 1 A steady-state current rating aligns with the thermal management requirements of the target application environment to ensure reliable long-term operation.

Inrush Current Limiters (ICL) Selection Notes

Select this component when a 10 Ohm initial resistance is required to limit surge currents. Ensure the operating environment stays within the specified -40°C to +85°C range. Verify that the 1 A continuous current capacity meets the load requirements without exceeding thermal limits during normal operation.

Inrush Current Limiters (ICL) Part Context

This part belongs to the NT series of inrush current limiters from YAGEO. These components are designed to protect sensitive electronic circuits from high initial charging currents. The series offers various resistance and current ratings to suit different power supply designs and load profiles.

Inrush Current Limiters (ICL) Replacement Considerations

NTB02-007MV is a related variant with 7 Ohms resistance and 2 A current rating. Cross-reference electrical parameters carefully before substitution to ensure compatibility with the existing circuit design and thermal constraints.