NTE04-010L

Inrush Current Limiters (ICL) Overview

The YAGEO NTE04-010L is an NTC thermistor belonging to the NT series, designed for inrush current limiting applications. It features a disc size of 10 mm and provides a zero power resistance of 10 Ohms at 25°C with a tolerance of 15%. The component supports a maximum steady-state current of 4 A at 25°C. It utilizes two terminals with a pitch of 5 mm and has a seated plane height of up to 16 mm.

Inrush Current Limiters (ICL) Feature Summary

• Functions as an inrush current limiter (ICL) using negative temperature coefficient technology
• Constructed with a 10 mm disc form factor for robust thermal handling
• Provides high precision resistance characteristics suitable for circuit protection

Inrush Current Limiters (ICL) Applications

• Inrush current limiting in electronic circuits
• Protection against surge currents during power-up
• General purpose NTC thermistor applications requiring 10 Ohm resistance

Inrush Current Limiters (ICL) Procurement Notes

Verify the specific manufacturing lead time, which may extend to approximately 30 weeks depending on regional availability. Confirm RoHS compliance status through official documentation prior to integration. Ensure the 15% resistance tolerance aligns with design requirements. Check for any regional distribution restrictions that might affect procurement channels.

Inrush Current Limiters (ICL) Selection Notes

Select this component when a 10 Ohm NTC thermistor with a 10 mm diameter is required for inrush current suppression. The 4 A steady-state current rating defines its capacity for continuous operation. Consider the 15% tolerance for circuit sensitivity. Compare against similar models like the NTE04-005M or NTE04-010M if different resistance values are needed.

Inrush Current Limiters (ICL) Part Context

The NTE04-010L is part of YAGEO's NT series of NTC thermistors. This series focuses on providing reliable inrush current limiting solutions. The component shares physical dimensions with other variants in the series but differs in electrical resistance values, such as 5 Ohms or 10 Ohms, allowing for tailored circuit protection strategies.

Inrush Current Limiters (ICL) Replacement Considerations

The NTE04-010M is a confirmed substitute within the same series offering identical 10 Ohm resistance and 10 mm disc size. Verify compatibility with the NTE04-005M only if a lower resistance value is acceptable. Cross-reference datasheets to ensure equivalent thermal and electrical performance characteristics.